Page 821 - APEX MRO Products

WELDING SUPPLIES

Industrial Safety Welding Oilfield Construction

WELDING & CUTTING ACCESSORIES Burning Guides
Centering Heads
•FeaUtsuerewsi:th a burning torch or straight edge.
Centering Heads • Base has three 30‑pound pull cast‑in magnets.
• Withstands heat and spatter.
•FeaEtfufercetsi:ve tool for setting centerlines,
Resistance: Heat and Spatter
establishing angles and marks for butt‑ins
or locating points inside pipes and tanks. SKU Width
430‑14791 2 in
• Head is fitted with an adjustable dial bubble
Wrap-A-Rounds
protractor and hardened centering pin.
•FeaFteuarteusre: metric scale and pitch chart.
• Useful for laying out keyways • Resists heat and cold.

and measuring declivity. Resistance: Heat‑ and Cold‑Resistant

SKU Pipe Cap. Head Width Head Type Type
430‑14775 1/2 in ‑ 4 in 4 in Manual Centering Pin Standard
430‑14776 1 in ‑ 8 in Spring‑Loaded Centering Pin Jumbo

Centering Head Tools SKU Size Group Width Length Pipe Capacity
430‑14752 Medium 3.88 in 4 ft 3 in ‑ 6 in
F•eaDteusriegsn:ed to establish and mark a centerline at 430‑14763 Medium 3.88 in 4 ft 3 in ‑ 6 in
430‑14764 Large 3.88 in 6 ft 3 in ‑ 10 in
any angle around the circumference (inside or outside) on a pipe or tank. 430‑14754 X‑Large 7 ft 4 in ‑ 12 in
430‑14766 X‑Large 5 in 7 ft 4 in ‑ 12 in
• Use it as a protractor level, or remove and use the 430‑14756 X‑Large 5 in 9 ft 6 in ‑ 16 in
430‑14767 X‑Large 5 in 9 ft 6 in ‑ 16 in
hardened center punch for other marking jobs. 430‑14753 Large 5 in 6 ft 3 in ‑ 10 in
3.88 in
• Magnetic.

SKU Pipe Cap. Type Circle Wiz Cutting Attachments WELDING SUPPLIES
496‑53025‑M 1 1/2 in ‑ 10 in Small
496‑53076‑M Standard F•eaFtourruesse: with conventional torches to cut small to medium holes.
8 in ‑ 48 in • Made with a universal brass bushing to adapt to any size or make of

Cutting & Burning Guides cutting torch, for larger circles buy the Chariot Cutting Guide 24219.
Cutting Diam: 5/8 in ‑ 12 in

Rap-Arounds SKU
496‑CW‑300
F•eaHtausreast:ough edge to protect from fraying and
Magnetic Circle Layout & Burning Guides
splitting which extends the life of the product.
F•eaAtsuraecsi:rcle layout tool with sliding
• Clear vinyl cover for protection in between jobs.
• Double ruled so that the rap‑around soapstone holder and 360 degree
scale on the magnetic base.
is never upside down.
Resistance: Abrasion; Heat • Will cut circles up to 30” in diameter.
• As a circle burning
SKU Size Group Width Length Pipe Capacity
900‑RA170 Large 4 in 6 ft 3 in ‑ 10 in guide use this same tool to cut a round plate.
900‑RA179 Large 4 in 9 ft 6 in ‑ 16 in Cutting Diam: 4 in ‑ 30 in

SKU
496‑28439

© 2016 1.800.678.6577 819