Page 80 - eBook Projek Pelajar.cdr

26

Normal toolbox which is 3seconds for the Hydraulic Toolbox Chair and 6
seconds for the Normal Toolbox. On the average time recorded, Hydraulic
Toolbox Chair took 3.333 seconds to finish Task B and Normal toolbox took
6.333 seconds to finish the Task B

For the Load Weight analysis, the length of the smaller cylinder pipe of the
hydraulic were measured frequently by continuously adding the load. At the
load of 0kg, the length of the smaller cylinder pipe measured is 12.5cm. At
the load of 6kg, the length of the smaller cylinder pipe was decreased to
12.4cm. After that, the load added to 8.5kg and the result of length measured
did not changed. Then, the load was put up to 11kg and the measurement of
smaller cylinder pipe was decreased to 12.3cm. The result of length of the
smaller cylinder pipe maintained for the 16kg and 25kg at 12.3cm. After the
load increased to 29kg, the measurement of length of the smaller cylinder
pipe decreased drastically to 2.3cm. Finally, the load of the object which is
29kg with the 12kg of the toolbox itself set a minimum weight of the
hydraulic can accommodated was 41kg. For the maximum weight, the
Hydraulic Toolbox Chair can have accommodated 120kg of load as the
maximum weight.

26