Page 82 - eBook Projek Pelajar.cdr

28

4.5 DICSUSSION

Referring to the above analysis, the results of the discussions that have been done the
project went smoothly but experienced several deficiency factors. Solutions were
made through recorded analysis. This project has been improved in terms of resistance
to hydraulic systems. Next, the weight has also been set to a limit of not more than
120kg, because if the project is too heavy at the highest-level during use, it will make
the structure unstable.
Table 4.3.1 above shows the data for the results of the results for the project measured
by the speed of time to repair an automotive vehicle with a regular toolbox. Time
velocity is measured by testing the tool itself. Through the tests made on the Hydraulic
Toolbox Chair, it was found that the time to repair a vehicle for this tool is faster than
the existing toolbox tool. The time taken to change the engine oil of a vehicle using
this tool is 3-4 minutes faster than using a regular Toolbox. Meanwhile, the time to
pick up the appliance using this Hydraulic Toolbox Chair is faster than using a regular
Toolbox. With this test, it can be proven that the objective of this project has been
achieved which is to design a Hydraulic Toolbox Chair and easy to use.

28