Page 238 - 2019 Technical NMT Hybrid4

Connected Services – eCall
Test mode

 After replacing the telematics transceiver, it is necessary to enter

Test Mode and perform Test Call

Test Mode Procedure

1. Connect the GTS to the DLC3

2. Turn the engine switch on (IG)

3. Turn the GTS on

4. Enter the following menus: Body Electrical >> Telematics >> Utility >> Emergency Call Check

5. According to the display on the GTS, perform Emergency Call Check to enter test mode

Test Call Procedure

1. Enter the test mode and check green indicator blinks 3 times

2. Speak into the telephone microphone and confirm that your voice can be heard from speakers*

 *Note: Due to close proximity of speaker and microphone feedback may be heard