Page 126 - millerwelds catalog_2022

A FLE22 Cat P 126 Accessories.qxp_Accessories 1/20/22 9:39 PM Page 1

Accessories

Wire Feeder Accessories Power Supply Adapter For more information on WC-115A and WC-24
see literature M/1.73 or M/1.76.
PSA-2 Control 141604
Extension Cables (14-Pin)
Required when using SuitCase 12RC, WC-115A Weld Control
8-Conductor Cables 20 Series or 70 Series feeders with 137546 Without contactor
242208025 25 ft. (7.6 m) power sources having only 115-volt 137546011 With contactor
242208050 50 ft. (15 m) power available. Control is equipped Operates on 115-volt power and
242208080 80 ft. (24.4 m) with a 14-pin receptacle and a 10-foot designed primarily for constant-
For SuitCase 12RC, 20 Series and 70 Series (except MPa (3 m) inter connecting cord with Hubbell current DC power sources. Can
Plus) feeders. For 14-pin remote controls and 24 VAC wire connections for older-style power sources. Can also be also be used with constant-voltage
feeders. 14-pin plug to a 14-pin socket. Not for 115-volt used with competitive power sources requiring a contact (CV) power sources or DC engine drives supplying 115
XR feeders. closure for contactor control. volts. Used with a constant-current (CC) source the control
circuit functions in a voltage-sensing mode, and with a CV
11-Conductor Cables PSA-2 Extension Cord 047813 source it functions as a constant-speed circuit. Includes
247831025 25 ft. (7.6 m) 25-foot (7.6 m) cord extends 10-foot (3 m) cord supplied
wire run-in and drive motor acceleration controls which
247831050 50 ft. (15 m) with PSA-2 control (4-pin to 4-pin connection). ensure optimum arc starting performance.
247831080 80 ft. (24.4 m)
For XR-AlumaFeed SuitCase and MPa Plus feeders. Spool Adapter WC-24 Weld Control 137549
Eleven conductors to support contactor control and remote For Spoolmate 200, Spoolmatic
voltage control on all Miller® electronic constant-voltage (CV) 047141 and Spoolmatic Pro. Easily mounts
14-pin power sources. Additional functions supported when For use with 14-pound (6.4 kg) spool of Hobart or Lincoln on power source. Designed for use
using the AlumaPower MPa, Invision MPa or XMT MPa self-shielding wire. with Miller® constant-voltage (CV)
power sources include synergic pulsed MIG, remote process power sources with 14-pin
select and side select capabilities. Spool Gun Controls and Kits receptacles and supplying 24 VAC.
14-Conductor Cables For more information on SGA 100 and SGA 100C Spool Gun Extension Hose and Cable Kits
242205025 25 ft. (7.6 m) see literature M/1.5. 132228 25 ft. (7.6 m)
242205050 50 ft. (15 m) 132229 50 ft. (15 m)
For HDC and WC-115 weld controls. Fully-loaded 14-pin SGA 100 043856 For Spoolmate 200, Spoolmatic and Spoolmatic Pro.
Required to connect Spoolmate
extension cables for remote controls, and 24-volt and Extends leads, etc. between spool gun and power source.
115-volt feeders. 3035 spool gun to a Millermatic
141/211. Also allows connection
to virtually any similar MIG welder Wire Straightener
— Miller or other brands. Includes 10-foot (3 m) 115-volt 141580 For .035–.045 inch
power cable with plug, 6-foot (1.8 m) interconnecting (0.9–1.1 mm) wire
cable, and 5-foot (1.5 m) gas hose. 141581 For 1/16–1/8 inch
SGA 100C 043857 (1.6–3.2 mm) wire
SGA with contactor required For 20 Series and 70 Series.
to connect Spoolmate 3035
spool gun to CV engine drives
like the Miller® Bobcat. Includes
10-foot (3 m) 115-volt power
cable with plug, 6-foot (1.8 m)
interconnecting cable, and 5-foot (1.5 m) gas hose.

REGISTER YOUR

NEW EQUIPMENT.

COMPLETE REGISTRATION AS SOON AS POSSIBLE
— IT’S QUICK AND EASY.

®
Registering your new Miller equipment may help with
any future insurance claims or in the event we need to
contact you regarding changes or upgrades. Whether
®
you’re a DIY welder or have purchased Miller
equipment on behalf of the company for which you
work… all Miller ® equipment should be registered so
we can provide you with the highest level of service.

REGISTER NOW AT MillerWelds.com/register
126