Page 19 - millerwelds catalog_2022

Portable Wire Feeders

Heavy industrial
®
ArcReach SuitCase 8 and 12 and ArcReach Smart Feeder Use with CC/CV (CV only with 12RC),
®
DC power sources. See spec chart below
See literature M/6.55
for Smart Feeder requirements.
Processes
Remote control MIG (GMAW) Flux-cored (FCAW)
of the power source without a cord. RMD and pulsed MIG (GMAW-P)
With an ArcReach SuitCase feeder ArcReach with ArcReach Smart Feeder
and ArcReach power source you can feeder or Suggested power sources
change output voltage at the feeder, remote Note: ArcReach SuitCase feeders are
compatible with standard power sources
and save a trip to the power supply.
and engine-driven welders, but function as
No extra control cord to purchase, standard equipment without remote control
maintain, string or unstring — saving capabilities. Full functionality of ArcReach is
only available with ArcReach power sources.
time and money. See pages 44–46
For ArcReach SuitCase 8 and 12
and 78–84 for ArcReach power
Maxstar® 280 Multiprocess (pg 41)
sources and engine drives. Dynasty® 300 Multiprocess (pg 41)
ArcReach
Easy process changeover. Simply power source XMT® Series (pg 42–45)
connect the ArcReach feeder to your Dimension ™ 650/650 ArcReach®
(pg 46)
leads and you are ready to go. All
™
Bobcat ™ 200 Air Pak (pg 75)
controls automatically shift to the Bobcat ™ Series (pg 76)
ArcReach feeder. Trailblazer® Series (pg 78, 81)
Big Blue® Series (pg 81–84)
Voltage-sensing feeders designed to run off of arc voltage. The ArcReach SuitCase 8 and 12 operate on the
For ArcReach Smart Feeder
®
arc voltage of almost any power source. The ArcReach Smart Feeder requires an XMT 350 FieldPro (page 44)
™
XMT® 350 FieldPro ™ (pg 44)
connected to three-phase power or an ArcReach-equipped engine drive (pages 78–84). (requires three-phase power)
Weld with large diameter wire. The ArcReach SuitCase 12 Heavy Duty model is specifically designed for Trailblazer® Series
(ArcReach models only) (pg 78)
applications using 3/32-inch cored wire.
Big Blue® Series
(ArcReach models only) (pg 81–84)
Additional features of ArcReach Smart Feeder
For SuitCase 12RC (requires power
®
Delivers excellent synergic RMD and pulsed MIG welding up source with 14-pin connector)
to 200 feet away from the power source with no control cords — XMT® Series (pg 42)
Dimension ™ 650 (pg 46)
twice the distance previously possible. RMD and pulsed MIG
Trailblazer® Series (pg 78, 81)
welding permits procedures with one wire and one gas to eliminate
Big Blue® Series (pg 81–84)
process switch-over time. RMD and pulsed MIG processes also help
RMD carbon steel Suggested guns
reduce weld failures and eliminate backing gas on some stainless
Bernard® Guns (pg 25–26)
and chrome-moly applications.
Pulsed MIG stainless Most popular accessories
Extension Cables (pg 126)
(for SuitCase 12RC only, 1 required)
® Flowmeter Kit 300343
SuitCase 12RC See literature M/6.5
Shielding Gas Filter 195189
Standard remote voltage control with a control cord. For applications where the feeder is within 100 feet of the Visit MillerWelds.com or your distributor
for other Miller® options and accessories.
power source and control cords are acceptable.
*Additional packages are available — visit MillerWelds.com or your distributor.
Input Welding Maximum Spool Net
Model Stock Number* Input Power Circuit Rating Wire Feed Speed Wire Type and Diameter Capacity Size Capacity Dimensions Weight
ArcReach (951726) w/Bernard BTB Gun 300 A Operates on 330 A at 50–780 ipm Solid wire .023–.052 in. (0.6–1.4 mm) 8 in. (203 mm), H: 12.75 in. (324 mm) 28 lb.
SuitCase 8 (951727) w/Bernard S-Gun open-circuit voltage 60% duty cycle (1.3–19.8 m/min.) Flux-cored .030–5/64 in. (0.8–2.0 mm) 14 lb. (6.4 kg) W: 7.25 in. (184 mm) (13 kg)
(951728) w/Bernard Dura-Flux gun and arc voltage: dependent on D: 18 in. (457 mm)
(301457) Feeder only 14–48 VDC/ arc voltage
ArcReach (951729) w/Bernard BTB Gun 300 A 110 max. OCV 425 A at Solid wire .023–.052 in. (0.6–1.4 mm) 12 in. (305 mm), H: 15.5 in. (394 mm) 35 lb.
SuitCase 12 (951730) w/Bernard S-Gun 60% duty cycle Flux-cored .030–5/64 in. (0.8–2.0 mm) 45 lb. (20 kg) W: 9 in. (229 mm) (15.9 kg)
(951731) w/Bernard Dura-Flux gun D: 21 in. (533 mm)
ArcReach ArcReach (301456) Feeder only 450 A at 30–400 ipm Flux-cored .030–3/32 in. (0.8–2.4 mm) 12 in. (305 mm), H: 15.5 in. (394 mm) 35 lb.

(951732) w/Bernard PipeWorx gun

(301604) Feeder only
SuitCase 12

dependent on
D: 21 in. (533 mm)
Heavy Duty 60% duty cycle (0.8–10.2 m/min.) 45 lb. (20 kg) W: 9 in. (229 mm) (15.9 kg)

arc voltage
ArcReach (951733) w/Bernard PipeWorx gun XMT 350 FieldPro 275 A at 50–500 ipm .035–.045 in. (0.9–1.1 mm) 12 in. (305 mm), H: 18 in. (457 mm) 50 lb.
Smart (300935) Feeder only connected to three- 60% duty cycle (1.3–12.7 m/min.) 33 lb. (15 kg) W: 13 in. (330 mm) (23 kg)
Feeder phase power or an dependent on D: 21.5 in. (546 mm)
ArcReach-equipped arc voltage
engine drive
SuitCase (951580) w/Bernard BTB Gun 300 A 24 VAC, 10 A, 425 A at 50–700 ipm Solid wire .023–.052 in. (0.6–1.4 mm) 12 in. (305 mm), H: 15.5 in. (394 mm) 31 lb.
12RC (301121) Feeder only 50/60 Hz 60% duty cycle (1.3–17.8 m/min.) Flux-cored .030–5/64 in. (0.8–2.0 mm) 45 lb. (20 kg) W: 9 in. (229 mm) (14.1 kg)
D: 21 in. (533 mm)
19