Page 21 - millerwelds catalog_2022

A FLE22 Cat P 21 Wire.qxp_Wire 1/20/22 7:01 PM Page 1

Bench Wire Feeders

Industrial 20 Series
70 Series (74S and 74D) See literature M/3.0 Heavy industrial 70 Series
Standard, simple feeders for most heavy-industrial applications, with the 74D providing Use with CV, DC
power sources.
increased accuracy and control of the most common weld parameters. Processes
MIG (GMAW) Flux-cored (FCAW)
Digital meters (74D models only) ensure accuracy Remote voltage control (standard on 74D, field option
Pulsed MIG (GMAW-P) with MPa Plus
when presetting and reading actual voltage, amperage on 74S) allows you to set both voltage and wire feed
feeder and MPa power source
and wire feed speed. speed at the feeder, saving time and increasing weld
Suggested power sources
quality because optimal weld parameters are easy to set.
Invision MPa Series (pg 14)
™
XMT® Series (pg 42–45)
Dimension ™ 650/650 ArcReach®
(pg 46)
70 Series (74 MPa Plus) See literature M/3.0 Suggested guns
Adds features for weld control and programs, plus push-pull aluminum capabilities. Bernard® Guns (pg 25–26)
XR-Aluma-Pro ™ Plus and XR -Pistol
™
Optimized with Invision MPa or XMT ® MPa power sources. Plus (see chart below)
™
Adjustable run-in control for improved arc starts. Recommended Most popular accessories
Feeder Cart 142382 (pg 118)
Dual schedule control allows the operator to switch aluminum solution. Extension Cables (pg 126)
between two preconfigured welding parameters Dedicated XR Plus guns Spool Adapter 047141 (pg 126)
without readjusting the machine, saving time and (gooseneck and pistol grip) Turntable Assembly 146236
enhancing quality. work with MPa Plus feeders (pg 126)
to coordinate wire feed speed of Wire Straightener (pg 126)
Trigger schedule select saves time when switching Field Kits for 20 Series Basic
the gun and the feeder. This provides
between two weld settings by simply tapping gun trigger. 301513 Digital meter and
optimized aluminum feeding and welding performance.
Trigger program select provides the ability to access See chart below for gun models and stock numbers. remote voltage control
any of the four active programs. 301515 Run-in control
Field Kits for 70 Series (74S)
Sequence control gives the operator the ability to Additional features when used with 194988 Remote voltage control for
adjust all of the welding parameters: preflow, run-in, Invision MPa or XMT MPa power sources single-wire models
weld time, crater, burnback and postflow. Synergic pulsed MIG. As wire speed increases/decreases, 194991 Remote voltage control for
dual-wire models
Locks and limits for restricting or limiting operator pulse parameters also increase/decrease to match the Hanging Bail 058435
adjust ments, such as voltage and wire feed speed right amount of power needed, reducing the need to Spool Covers
parameters. make additional adjustments. 057607 For 20 and 70 Series
single-wire models
™
Four weld program memories allow operators to Profile Pulse provides
and left side of
recall up to four previously used processes and their TIG appearance with MIG dual-wire models
weld settings. simplicity and productivity. 090389 For right side of
Push-pull capability provides consistent, versatile and Achieve “stacked dimes” dual-wire models
dependable aluminum wire feeding over greater distances. without gun manipulation. Profile Pulse frequency Wire Reel Assembly 108008
can be changed to increase or decrease the spacing Remote configurations are available —
see page 22 and literature M/3.0
between the ripple pattern to achieve the desired
Visit MillerWelds.com or your distributor
weld appearance.
for other Miller® options and accessories.
*Additional packages are available — visit MillerWelds.com or your distributor. **Requires gun wire kit (230708) to run 1/16 in. (1.6 mm) wire.
Input Maximum Spool
Model Stock Number* Power Wire Feed Speed Wire Type and Diameter Capacity Size Capacity Dimensions Net Weight
20 Series Basic (301499) Feeder only 24 VAC, 75–750 ipm .023–5/64 in. (0.6–2.0 mm) 60 lb. (27 kg) H: 16 in. (406 mm) 46 lb. (21 kg)
Basic (951779) w/Bernard BTB Gun 300 A 3.5 A, (1.9–19 m/min.) coil with optional W: 12.375 in. (314 mm)
Digital (301499001) Feeder only 50/60 Hz wire reel assembly D: 27.875 in. (708 mm)
Digital (951780) w/Bernard BTB Gun 300 A (108008)
70 Series S-74S (951196) w/Bernard BTB Gun 400 A 24 VAC, 50–780 ipm .023–5/64 in. (0.6–2.0 mm) 60 lb. (27 kg) H: 14 in. (356 mm) 48 lb. (21.2 kg)
(Single-wire S-74D (951198) w/Bernard BTB Gun 400 A 10 A, (1.3–19.8 m/min.) MPa Plus model coil with optional W: 12.5 in. (318 mm)
models) S-74 MPa Plus (951291) w/Bernard BTB Gun 400 A 50/60 Hz wire reel assembly D: 28 in. (711 mm)
Solid wire .023–5/64 in. (0.6–2.0 mm)
70 Series D-74S (951203) w/Bernard BTB Gun 400 A Aluminum** .035–1/16 in. (0.9–1.6 mm) (108008) H: 14 in. (356 mm) 87 lb. (39.5 kg)
(Dual-wire D-74D (951204) w/Bernard BTB Gun 400 A W: 21 in. (533 mm)
models) D-74 MPa Plus (951292) w/Bernard BTB Gun 400 A D: 35 in. (889 mm)
Optional Push-Pull Gun Cable Length Wire Type and Gun Only
(For MPa Plus feeders only) 15 ft. (4.6 m) 25 ft. (7.6 m) Welding Current Rating Wire Feed Speed Diameter Capacity Dimensions Net Weight
XR-Aluma-Pro Plus (Air-cooled) (301575) (301574) 300 A at 100% duty cycle 70–780 ipm Aluminum** H: 5 in. (127 mm) 2.5 lb. (1.1 kg)
(1.8–19.8 m/min.) .030–1/16 in. (0.8–1.6 mm) W: 2.5 in. (64 mm)
XR-Aluma-Pro Plus (Water-cooled) (301576) (301577) 400 A at 100% duty cycle 2.9 lb. (1.3 kg)
L: 17 in. (432 mm)
XR-Pistol Plus (Air-cooled) (300753) (300754) 200 A at 100% duty cycle 70–780 ipm Aluminum** H: 7.375 in. (187 mm) 2.2 lb. (1 kg)
(1.8–19.8 m/min.) .030–1/16 in. (0.8–1.6 mm) W: 1.875 in. (48 mm)
XR-Pistol Plus (Water-cooled) — (300757) 400 A at 100% duty cycle L: 10.625 in. (270 mm) 2.4 lb. (1.1 kg)
21