Page 39 - millerwelds catalog_2022

A FLE22 Cat P 39 MP.qxp_Multiprocess 1/20/22 7:09 PM Page 1

Multiprocess

Industrial
®
Multimatic 235 See literature DC/14.0
Processes
MIG (GMAW) Flux-cored (FCAW)
DC stick (SMAW)
DC Lift-Arc ™ TIG (GTAW)
Pulsed TIG (GTAW-P)
Comes complete with
Welding Capability 15 ft. (4.5 m) 250-amp MDX -250
™
MIG gun with AccuLock ™ MDX ™
Max. 3/8 in. (9.5 mm) Max. 3/8 in. (9.5 mm)
consumables
10 ft. (3 m) cable with electrode holder
Mild Steel Aluminum 10 ft. (3 m) work cable with clamp
7 ft. (2.1 m) industrial power cord
Min. 24 ga. (0.6 mm) Min. 18 ga. (1.2 mm)
Two factory-installed gas solenoids
Max. 3/8 in. (9.5 mm)
Flow gauge regulator and gas hose
See page 125 Max. 3/8 in. (9.5 mm)
for argon or AR/CO 2 mix
TIG Mild Steel Stick Mild Steel Chain to secure gas cylinder
.030/.035 in. reversible V-groove
Min. 24 ga. (0.6 mm) Min. 16 ga. (1.5 mm)
drive rolls
Aluminum welding uses optional spool guns. Extra contact tips and material
TIG welding uses optional Multimatic 235/255 TIG kit. thickness gauge (229895)
Most popular accessories
Spoolmate ™ Spool Guns (pg 27)
300371 Spoolmate 100
301272 Spoolmate 150
300497 Spoolmate 200
Multimatic 235 Spoolmatic® Spool Gun (pg 28)
with running gear (non-Pro gun only)
package shown.
EZ-Latch ™ Single Cylinder Running
Gear 301449 (pg 118)
™
Auto-Set Elite offers predefined weld settings to EZ-Latch ™ Dual Cylinder Rack with
increase ease of use and ensure that the job is done Elevated Gun and Cable Rack
right for operators of all skill levels. 301481
Converts an EZ-Latch ™ Single Cylinder
Available for MIG, stick and DC TIG processes with the
ability to fine-tune your settings Running Gear into a Dual Cylinder
Rack Running Gear as seen below
Set weld parameters by:
MIG — selecting wire and gas type, wire diameter and
Easy-to-understand interface with 4.3-inch color material thickness
LCD display and intuitive connection setup images. Stick — selecting electrode type, electrode diameter

Weighing only 63 pounds (machine only), this and material thickness

™
lightweight MIG, stick and DC TIG welder provides DC Lift-Arc TIG — selecting remote on/off, tungsten
portability on the job. diameter and material thickness
™
Compatible with Spoolmate 100, 150 and 200, Pro-Set (TIG/stick) eliminates the guesswork when
™
and Spoolmatic 15A and 30A spool guns to offer a setting weld parameters. Use Pro-Set when you want the
variety of aluminum welding solutions. speed, convenience and confidence of preset controls.
™
EXCLUSIVE! Auto-Gun Detect automatically adjusts Two shielding gas connections (one for MIG gas and
voltage, wire speed and timers for faster switching one for TIG gas) so both gases can be left connected
between MIG and spool guns. to the machine — no switching needed. EZ-Latch ™ Dual Cylinder Running
Gear 951769 (pg 118)
Heavy-duty aluminum two-drive-roll system. Manual mode offers additional stick and TIG Protective Cover 301521 (pg 121)
adjustments for increased control including adjustable Multimatic 235/255 TIG Kit 301518
Uses 4-, 8- or 12-inch (102, 203 or 305 mm) spools.
DIG control for stick and 0.1–150 pulses per second for (pg 124)
DC pulsed TIG. 10-Pin to 14-Pin Adapter Cord
301545 (pg 124)
Fan-On-Demand cooling system only operates when Wireless Remote Foot Control
™
needed, reducing power consumption and keeping 301580 (pg 125)
internal components cleaner. Visit MillerWelds.com or your distributor
for other Miller® options and accessories.
*Input voltage range for the Multimatic 235 is 204–276 V.
Stock Number Welding Amperage Amps Input at Rated Output, 50/60 Hz Max. Open- Power Source Power Source
(907780) 240 V Mode/Process Range Rated Output 240 V* KVA KW Wire Feed Speed Circuit Voltage Dimensions Net Weight
(951846) 240 V CV: MIG/flux-cored 30–235 170 A at 22.5 V, 20.0 5.0 4.9 60–600 ipm 54 VDC H: 19.25 in. (489 mm) 63 lb. (29 kg)
with single cylinder 60% duty cycle (1.5–15.2 m/min.) W: 13.75 in. (349 mm)
running gear CC: Stick 30–200 150 A at 26 V, 20.2 5.0 4.8 — D: 24.25 in. (616 mm)
(951847) 240 V 60% duty cycle
with dual cylinder
running gear and TIG kit CC: DC TIG 20–210 180 A at 17.2 V, 17.0 4.2 4.1
60% duty cycle
39