Page 37 - millerwelds catalog_2022

A FLE22 Cat P 37 MP.qxp_Multiprocess 1/20/22 7:08 PM Page 1

Multiprocess

Light industrial
®
Multimatic 200 and 215 See literature DC/12.57 (200) and DC/12.59 (215)
Processes
MIG (GMAW) Flux-cored (FCAW)
DC stick (SMAW) DC TIG (DC GTAW)
Comes complete with
™
10 ft. (3 m) 250-amp MDX -250
MIG gun with AccuLock ™ MDX ™
Multi-voltage plug (MVP ™ ) allows
connection to common 120- and consumables (Multimatic 200) OR
240-volt power receptacles without 10 ft. (3 m) 100-amp MDX ™ -100
the use of any tools — simply choose MIG gun with AccuLock ™ MDX ™
the plug that fits the receptacle and consumables (Multimatic 215)
connect to the power cord.
Multimatic 200 13 ft. (4 m) cable with electrode holder
Multimatic 215 and 25 mm Dinse-style connector
10 ft. (3 m) work cable with clamp
and 25 mm Dinse-style connector
Power cord with MVP plugs for
120 V and 240 V
Quick Select ™ drive roll for
.024 in. (0.6 mm) or .030/.035 in.
(0.8/0.9 mm) solid wire, and
.030/.035 in. (0.8/0.9 mm)
flux-cored wire
See page 125

Welding Capability Weighing only 29 pounds (200) or 38 pounds (215), these
lightweight MIG, stick and TIG welders provide portability on the job.
Max. 3/8 in. (9.5 mm) Max. 3/8 in. (9.5 mm)
MIG MIG Impact-resistant, flame-retardant case (200 only) provides strength
Mild Steel Aluminum and durability, while protecting components and welding wire from
Flow gauge regulator and gas hose
moisture, dust and other contaminants.
Min. 24 ga. (0.6 mm) Min. 18 ga. (1.2 mm) for argon or AR/CO 2 mix, extra MDX
Auto-Set Elite can be used on multiple materials and multiple processes contact tips, information/settings
™
Max. 3/8 in. (9.5 mm)
with the ability to fine-tune your settings. Easy to set up and use! chart and material thickness gauge
Max. 3/16 in. (4.8 mm) Stick (229895) — Hobart® spool of .030 in.
Mild Steel Excellent arc characteristics! Positive arc starts and an extremely
TIG Mild Steel solid wire and hook-and-loop cord
stable arc with minimal spatter. wraps as seen in photo above
Min. 24 ga. (0.6 mm) Min. 16 ga. (1.5 mm)
™
Auto Spool Gun Detect automatically detects when a MIG gun or are included with Multimatic 215
Aluminum welding uses optional Spoolmate 100 model only
and 4000 series aluminum wire OR Spoolmate 150 spool gun is connected, eliminating the need for a switch.
(effective with Multimatic 200 serial number Uses 4- or 8-inch (102 or 203 mm) spools. Most popular accessories
™
MF364047N) and either 4000 or 5000 series aluminum Spoolmate Spool Guns (pg 27)
wire. TIG welding uses optional TIG contractor kit. 300371 Spoolmate 100
Multimatic 215 model additional features
301272 Spoolmate 150
Intuitive color LCD interface Running Gear/Cylinder Rack
makes it quick and easy to 301239 (pg 118)
adjust parameters. Protective Cover 301262 (pg 121)
(for Multimatic 215 only)
Angled cast-aluminum TIG Contractor Kits (pg 124)
drive system provides smooth 301287 For Multimatic 200
feeding and the ability to use 301337 For Multimatic 215
10-, 12- or 15-foot guns. Visit MillerWelds.com or your distributor
for other Miller® options and accessories.
Welding Input Amperage Amps Input at Rated Output, 50/60 Hz Max. Open- Net
Model/Stock Number Mode/Process Power Range Rated Output 120 V 230 V/240 V KVA KW Wire Feed Speed Circuit Voltage Dimensions Weight
Multimatic 200 CV: MIG/ 120 V 30–140 90 A at 18.5 V, 60% duty cycle 18.0 — 2.2 2.0 70–425 ipm 90 VDC H: 14.5 in. 29 lb.
(907518) flux-cored 110 A at 19.5 V, 20% duty cycle 22.4 — 2.7 2.6 (1.8–10.8 m/min.) (368 mm) (13.2 kg)
(951649) with TIG W: 9.75 in.
contractor kit (see page 230 V 30–200 150 A at 21.5 V, 20% duty cycle — 17.5 4.0 3.8 (248 mm)
124 for kit contents) CC: TIG 120 V 5–150 150 A at 16 V, 30% duty cycle 27.0 — 3.3 3.2 — 90 VDC D: 17 in.
230 V 5–150 150 A at 16 V, 30% duty cycle — 13.8 3.2 3.0 (22–25 VDC, (432 mm)
sense voltage
CC: Stick 120 V 20–100 100 A at 24 V, 35% duty cycle 24.0 — 2.9 2.8 for stick and
230 V 20–150 150 A at 26 V, 30% duty cycle — 20.8 4.8 4.5 Lift-Arc ™ TIG)
Multimatic 215 CV: MIG/ 120 V 30–125 110 A at 19.5 V, 60% duty cycle 23.0 — 2.8 2.8 60–600 ipm 58 VDC H: 12.5 in. 38 lb.
(907693) flux-cored 240 V 30–230 200 A at 24 V, 20% duty cycle — 25.8 6.2 6.2 (1.5–15.2 m/min.) (318 mm) (17.2 kg)
(951674) with TIG W: 11.25 in.
contractor kit (see page 150 A at 21.5 V, 40% duty cycle — 16.7 4.0 4.0 (286 mm)
124 for kit contents) CC: TIG 120 V 20–150 140 A at 15.6 V, 40% duty cycle 24.6 — 3.0 3.0 — 58 VDC D: 20.5 in.
(521 mm)
240 V 20–210 190 A at 17.6 V, 20% duty cycle — 18.0 6.7 6.7
CC: Stick 120 V 30–100 90 A at 23.6 V, 40% duty cycle 22.7 — 2.7 2.7
240 V 30–200 190 A at 27.6 V, 20% duty cycle — 27.0 6.5 6.5
37