Page 4 - millerwelds catalog_2022

BENEFITS OF BLUE. TECHNOLOGIES

AND INNOVATIONS.

Miller is committed to bringing forward-thinking technologies and solutions to the welding industry.
We listen to your challenges and constantly seek to improve our products and services to better address them.

EASE OF USE

™
ArcConnect Provides single-phase stick weld
Next generation communication that utilizes high-speed signals capability with the engine shut off
to improve weld performance and allow point-of-use controls to be by plugging into 120- or 240-volt
located at the feeder. Found on the Deltaweld®Systems (pg 12). wall power. Ideal for indoor or noise-sensitive environments.
Found on the Fusion engine drive (pg 73).
Allows for any input voltage hookup
™
with no manual linking. Provides Pro-Set
convenience in any job setting and is ideal for dirty or unreliable Provides speed, convenience and confidence of preset controls
power. Found on the following products: and eliminates guesswork when setting TIG or stick weld
MIG Stick parameters. Found on the following products:
Millermatic®255 (pg 9) Maxstar®(pg 49–50) Multiprocess TIG
AlumaPower ™ 350 (pg 11) CST ™ 282 (pg 51) Multimatic®220 AC/DC (pg 38) Syncrowave®(pg 54–55)
Invision ™ 352 (pg 14) TIG Multimatic®235 (pg 39) Maxstar®(except 161) (pg 56/58)
Continuum ™ (pg 15) Maxstar®(pg 53/56/58) Maxstar®(pg 41) Dynasty®(pg 57–58)
Auto-Continuum ™ (pg 16) Syncrowave®210 (pg 54) Dynasty®(pg 41)

Multiprocess Dynasty®(pg 57–58)
Multimatic®255 (pg 40) Plasma cutters ™
Maxstar®(pg 41) Spectrum®(pg 95) QuickTech
Dynasty®(pg 41) Provides easy setup and process changing on the
XMT®350 (pg 42–45) Multimatic®220 AC/DC multiprocess welder (pg 38).

Automatically determines polarity. Work is always connected to
AutoSense the bottom right receptacle. MIG gun and TIG torch can stay
™
Reduces issues related to setting helmet sensitivity by allowing connected at the same time.
welder to push and hold the AutoSense button to automatically Automatically switches to the right process. Just hit trigger
set the helmet sensitivity for their environment. Found on or foot control and the machine automatically changes,
Digital Infinity and Digital Elite welding helmets (pg 111). eliminating the need to manually change processes.
™
™
Automatically recalls settings from the last process used.
Auto-Set
™
Provides speed, convenience and confidence of preset controls Remote start/stop
™
and eliminates guesswork when setting weld parameters. Allows you to easily turn your Bobcat welder/
Variations of this technology include Advanced Auto-Set and generator on and off remotely so it only runs
Auto-Set Elite. Found on the following products: when you need it. Get more out of each tank,
MIG TIG extend time between maintenance and work
Millermatic®(except 252) (pg 7–10) Syncrowave®210 (pg 54) without the hassle of walking back to your
™
Multiprocess machine. Found on the Bobcat 225 and
Multimatic®(pg 37–40) 260 (non-LP) engine drives (pg 76).

MVP plugs and adapters X-Mode
™
™
Allows connection to common 120- or 240- Electromagnetically senses the weld
volt receptacles without the use of tools — to reduce sunlight interference
just choose the plug/adapter that fits the and continuously detects the
receptacle. Found on the following products: arc even if sensors are
MIG TIG blocked. Found on the
Millermatic®211 (pg 7) Diversion ™ (pg 53) T94 , Digital Infinity ,
™
™
Multiprocess Syncrowave®210 (pg 54) Digital Elite and
™
Multimatic®200/215 (pg 37) Engine drives
Classic VSi welding
™
Multimatic®220 AC/DC (pg 38) Fusion (pg 73)
helmets (pg 110–111).
Stick Plasma cutters
Thunderbolt®160 (pg 49) Spectrum®375/625 (pg 94)