Page 51 - Dzenete Baumaine

3.2.2 Material Surface Finish Swatch Reference Teak Wood Finish Natural

What is teak Finish Process of the Swatch Additional Work

Teak is an exotic hardwood. it contains

resin that helps protect the wood giving - Use a heat gun to heat up the template and
it a natural resistance against water, insects then use the template to place it over a example

and rot. Teak can be refinished later of the swatch cut out of foam.

at the stage of the life you that need to r - Hold the swatch and the foam model together
remove the aged surface before applying until the swatch template is gone cold and moulded

protective teak oil finish that gives the wood over the foam model.

natural look. - Then applied grey primer and when dried use sand

Process of teak finish paper to sand it repeated this step 4 times.

To create teak finish is not a smooth process - Then by using brush applied teak finish when dried
I used black paint to give some dark patches.
at least until teak finish is not applied. - I then used wood grain rubbers to get the grain of

Most teak furniture is naturally finished the wood i used it by pressing it down while the paint

the wood is sanded down to smooth feel was wet and rubbing it down.
with fine grit sandpaper. you need to apply -When it dried i kept applying teak paint to get that

several coats of teak oil to the wood finish I used teak brightener to bring the colour

to give the smoothest furniture shiny finish. brighter and also cleaned the swatch from

this is the most common teak finish process. any dirt.

45