Page 23 - MF3010Series Service Manual (Rev.0) (1)-017-045 (1)

2 Technical Overview > Pickup Feed System > Overview > Overview
2-24
Pickup Feed System The pickup and feeding system executes pickup and feeding of papers and is composed of
the Main Motor (M1), Pickup Solenoid (SL1), and rollers.
In this equipment, pickup from the pickup tray is available. There is only a face-down delivery.
Overview Papers set on the pickup tray are fed by the pickup roller. The papers are fed to the

■ Overview photosensitive drum, the transfer charging roller, the fixing sleeve unit, the pressure roller and
then to delivery roller in this order; and then they are delivered to the delivery tray.
The feeding route of papers has three photointerrupters; the Paper Leading Edge Sensor
Main Controller (PS751), the Fixing Delivery Sensor (PS701), the Paper Width Sensor (PS702). They detect
arrival and passing of papers.
If a paper does not reach or pass through each sensor within a specified time, the engine
controller judges this status as jam and notices the jam occurrence to the main controller.
PS701: Fixing Delivery Sensor
Engine Controller
PS702: Paper Width Sensor
PS751: Paper Leading Edge Sensor
PS702 Delivery Roller
M1: Main Motor
Fixing SL1: Pickup Solenoid
Pressure
Roller
Delivery Tray
PS701
Fixing Film Unit
Photosensitive
Drum
M1
PS751
Pickup Roller
Pickup Tray
SL1
Transfer Roller
Separation Pad
F-2-24

2-24
2 Technical Overview > Pickup Feed System > Overview > Overview