Page 11 - McD_6118-AEW-XX-XX-NBS-A-001_Neat

EXECUTION

710 GENERAL
• Workmanship generally: To provide a secure weathertight installation.
• Fabrication: Machine cut and drill components in the workshop wherever possible.
• Installation of glazing: To BS 6262-4.
• Materials:
- Compatibility: Glass/ plastics, surround materials, sealers, primers and paints/
clear finishes to be used together to be compatible. Avoid contact between
glazing panes/ units and alkaline materials such as cement and lime.
- Protection: Keep materials dry until fixed. Protect insulating glass units and
plastics glazing from the sun and other heat sources.
- Protective coverings to panes: Carefully peeled back from edges and trimmed
off to facilitate glazing. Remainder retained in place until completion unless
instructed otherwise
• Fixings: Concealed unless specifically agreed otherwise.

720 JOINERY
• Workmanship: As section Z10.

730 SEALANT JOINTS
• Sealant application: As section Z22 to prepared joints. Finish triangular fillets to a flat
or slightly convex profile.

740 IRONMONGERY
• Fixing: Assemble and fix carefully and accurately using fasteners with matching
finish supplied by ironmongery manufacturer. Do not damage ironmongery and
adjacent surfaces.
• Checking/ adjusting/ lubricating: Carry out at Completion and ensure correct
functioning.

COMPLETION

910 DOCUMENTATION
• Manuals: Provide information detailing repair and modification and level of
expertise.

RotF generic (intermediate) NBS 2014 6118-AEW-XX-XX-NBS-A-01