Page 500 - McD_6118-AEW-XX-XX-NBS-A-001_Neat

Q40 Fencing

FENCING SYSTEMS

210 WOODEN POST AND RAIL FENCING
• Manufacturer: Contractor's choice.
- Product reference: Submit proposals.
• Standard: To BS 1722-7, type site specific from table 3.
• Height: site specific.
• Wood: site specific.
- Treatment: To provide a 15 year service life.
- Finish: Exterior wood stain, as section M60.
• Maximum centres of posts: site specific.
• Method of setting posts: 300 mm square or round holes, 600 mm deep filled to not
less than half the depth with concrete .
• Accessories: site specific.
• Conformity: Submit manufacturer's and installer's certificates, to BS 1722-7.

250 PREFABRICATED WOOD PANEL FENCING
• Manufacturer: Contractor's choice.
- Product refernce: Submit proposals.
• Standard: To BS 1722-11.
• Type of infill: Square edged horizontal boards, lapped.
- Treatment: To provide a 15 year service life.
- Finish: Exterior wood stain as section M60.
• Height: site specific.
• Posts: site specific.
- Treatment: To provide a 15 year service life.
- Finish: Exterior wood stain, as section M60.
• Method of setting posts:
- Hole depth: 300 mm square x 600 mm deep.
- Concrete depth: Filled to not less than half the hole depth.
• Accessories: site specific.
• Conformity: Submit manufacturer's and installer's certificates, to BS 1722-11.

260 CONCRETE POST AND PANEL FENCING
• Manufacturer: Contractor's choice.
- Product reference: Submit proposals.
• Precast concrete elements: To BS EN 12839.
- Panels wind load class: B.
- Posts wind load class: B.
• Height: site specific.
• Panel types: Solid reinforced precast concrete with natural finish.
• Post spacing: 2.05 m.
• Method of setting posts: 300 mm square or round holes, 700 mm deep filled to not
less than half the depth with concrete.
• Accessories: site specific.

RotF generic (intermediate) NBS 2014 6118-AEW-XX-XX-NBS-A-01