Page 148 - B6118-AEW-XX-XX-PP-A-0001_(P17)_Contractors Manual

DESIGN

D4 Overview of ERDDS Interior Décor Concepts

D4.32 OAT Walls

Screens must be installed to all Order Assembly Standard made for you kitchens:
Tables (OAT) to restrict the customer view into 68mm screen that fits over the OAT, available
the kitchen. The OAT wall is a furniture item for 1220 and 915 OAT walls
and will not be provided as part of the kitchen - 2 kvs option
equipment. - 3 kvs option
- 4 kvs option
The type of OAT wall required will depend on
the kitchen and service platform:

Hub and Spoke kitchens:
200mm wide wall with allowance for the kitchen
conveyor to pass through to suit 1220 and 915
OAT
- 2 kvs option
- 3 kvs option
- 4 kvs option
THE CONTENTS OF THIS PROPOSAL, INCLUDING ALL
IDEAS, DRAWINGS, ARTWORK AND LAYOUTS ARE THE
3 KVS 3 KVS 3 KVS 3 KVS PROPERTY OF KDM SHOP FITTING.
front panel a rear panel - front view section a-a end elev THE CONTENTS OF THIS DRAWING MAY NOT BE
REPRODUCED IN WHOLE OR PART WITHOUT THE
WRITTEN PERMISSION OF KDM SHOP FITTING.
1020.0 1020.0 WHEREVER FIGURED DIMENSIONS ARE GIVEN THEY
ARE TO BE ACCEPTED IN PREFERENCE TO SCALED
SIZES. THE CONTRACTORS ARE RESPONSIBLE FOR
VERIFYING ALL DIMENSIONS.
Revisions : ar
Rev A : 02/12/15
392.0 38.0 50.0 50.0 38.0 392.0 392.0 38.0 50.0 38.0 392.0 441.0 3.0 Notes added.
Ø10.0 Ø10.0 Ø10.0 Ø10.0
752.0 524.0 440.0 Ø8.0
Ø16.0 12.0
KVS 1
Ø16.0
9.0 311.0 311.0
9.0 Ø8.0 12mm compact 12mm compact rear panel
733.0 KVS 2 KVS 3 733.0 1465.0 1465.0 end closer 3.0 softwood batten
12mm compact front panel
320.0 8.0 9.0 302.0 320.0 200.0 108.0 Ø8.0 320.0 plan detail at ends
506.0 965.0 nts
Ø16.0 Ø16.0 765.0
Ø10.0 Ø10.0 108.0 183.0 183.0 654.0
2585.0 573.0 280.0 415.0 Ø16.0 190.0 415.0 Ø16.0 285.0 280.0 454.0 340.0 60.0 415.0 285.0 190.0 415.0 454.0 2585.0 20.0
Ø10.0 Ø10.0 Ø10.0 Ø10.0
R5.0 38.0 38.0 12mm compact rear panel softwood batten stopped 20mm short of front panel 12mm compact front panel
R5.0 R50.0 3.0
Ø5.0 180.0 3 KVS 12mm compact rear panel softwood batten 12mm compact front panel
1513.0 30.0 rear panel - rear view 1513.0
1020.0
1120.0 20.0
910.0 600.0 815.0 325.0 370.0 325.0
392.0 Ø16.0 Ø10.0 50.0 R25.0 Ø5.0 allow M4 inserts section detail
392.0
nts
100.0 Please note - this drawing contains indicative design specification
Ø5.0
Ø5.0 and is for guidance only, it should be used in conjunction with
150.0 McDonalds instruction and site specific requirements.
allow M4 inserts 100.0 Client :
80.0 80.0 120.0 McDonalds
a 1465.0 Ø5.0 Ø5.0 Project :
100.0 1062.0 Various
180.0 1165.0
190.0 1065.0 notes - Title :
845.0 415.0 415.0 845.0 945.0 TV Wall - 1020mm Wide
3 KVS Monitors
1020.0 allow M4 inserts to front panel. Drawing No :
allow M4 insert to rear panel.
KDM_McD_1020WALL_3KVS_02
3 KVS 60.0 60.0 softwood battens to stop 20mm short of compact panels. Scale : Date : Contract No :
compact end closers to be set back by 3mm.
plan 340.0 285.0 108.0 340.0 must be bonded using heat resistant glue. 1:10 @ A2 19/11/15 KDM1074
Drawn by : Checked by : Status : Revision :
red holes denotes 10mm through holes, in rear and front ar - I A
panels and 16mm countersunk holes on rear face of rear
ref - N3 38.0 38.0 panel and front face of front panel.
A2
THE CONTENTS OF THIS PROPOSAL, INCLUDING ALL
IDEAS, DRAWINGS, ARTWORK AND LAYOUTS ARE THE
PROPERTY OF KDM SHOP FITTING.
2 KVS 2 KVS 2 KVS 2 KVS THE CONTENTS OF THIS DRAWING MAY NOT BE THE CONTENTS OF THIS PROPOSAL, INCLUDING ALL
front panel a rear panel - front view section a-a end elev REPRODUCED IN WHOLE OR PART WITHOUT THE 4 KVS 4 KVS 4 KVS 4 KVS IDEAS, DRAWINGS, ARTWORK AND LAYOUTS ARE THE
WRITTEN PERMISSION OF KDM SHOP FITTING.
PROPERTY OF KDM SHOP FITTING.
1230.0 1230.0 WHEREVER FIGURED DIMENSIONS ARE GIVEN THEY front panel a rear panel - front view section a-a end elev THE CONTENTS OF THIS DRAWING MAY NOT BE
ARE TO BE ACCEPTED IN PREFERENCE TO SCALED
REPRODUCED IN WHOLE OR PART WITHOUT THE
SIZES. THE CONTRACTORS ARE RESPONSIBLE FOR WRITTEN PERMISSION OF KDM SHOP FITTING.
VERIFYING ALL DIMENSIONS. 1020.0 1020.0 WHEREVER FIGURED DIMENSIONS ARE GIVEN THEY
Revisions : ARE TO BE ACCEPTED IN PREFERENCE TO SCALED
Rev A : 02/12/15 ar SIZES. THE CONTRACTORS ARE RESPONSIBLE FOR
3.0
Notes added.
VERIFYING ALL DIMENSIONS.
50.0 392.0 392.0 50.0 392.0 Revisions :
38.0 38.0 38.0 38.0 392.0 38.0 50.0 50.0 38.0 392.0 392.0 38.0 50.0 38.0 392.0 3.0 Rev A : 02/12/15 ar
Notes added.
Ø10.0 Ø10.0 Ø10.0 Ø10.0 442.0 Ø10.0 Ø10.0 8.0 Ø10.0 Ø10.0 442.0
945.0 Ø16.0 Ø16.0 945.0 12.0 Ø8.0 Ø8.0
12mm compact 12mm compact rear panel KVS 1 Ø16.0 KVS 2 Ø16.0
end closer 12.0
1465.0 520.0 520.0 1465.0 3.0 softwood batten 9.0 200.0 Ø8.0 Ø8.0
12mm compact front panel
12mm compact rear panel
9.0 127.0 20.0 630.0 733.0 KVS 3 KVS 4 8.0 733.0 1465.0 111.0 1465.0 630.0 12mm compact softwood batten
end closer
973.0 108.0 Ø8.0 108.0 plan detail at ends 3.0 12mm compact front panel
KVS 1 KVS 2 nts 9.0 9.0 302.0 200.0 108.0
14.0 14.0 506.0 965.0 plan detail at ends
320.0 302.0 9.0 200.0 Ø8.0 20.0 320.0 Ø16.0 Ø16.0 765.0 nts
506.0 100.0 100.0 461.0 Ø10.0 108.0 654.0
2585.0 520.0 520.0 100.0 285.0 Ø10.0 285.0 190.0 Ø10.0 2585.0 415.0 Ø10.0 415.0 454.0 183.0 415.0 415.0 183.0 454.0
Ø10.0 Ø10.0 261.0 183.0 183.0 261.0 20.0 2585.0 280.0 285.0 280.0 340.0 60.0 285.0 2585.0 section detail
380.0 Ø16.0 190.0 Ø16.0 573.0 Ø16.0 Ø10.0 190.0 Ø16.0 Ø10.0 190.0 nts
R5.0 38.0 38.0 softwood batten stopped 20mm short of front panel 12mm compact front panel R5.0 Ø10.0 38.0 Ø10.0 38.0 20.0
R5.0 100.0 20.0 3.0 12mm compact rear panel
R50.0 12mm compact rear panel 12mm compact front panel R5.0 R50.0 3.0
Ø5.0 Ø5.0 180.0 2 KVS softwood batten
30.0 rear panel - rear view Ø5.0 180.0 4 KVS
1320.0 1405.0 1220.0 1230.0 1320.0 1513.0 30.0 rear panel - rear view 1020.0 1513.0 12mm compact rear panel softwood batten 12mm compact front panel
1120.0 20.0 1120.0
910.0 600.0 815.0 325.0 580.0 325.0 section detail 815.0 325.0 370.0
392.0 38.0 50.0 Ø5.0 392.0 allow M4 nts 910.0 600.0 392.0 50.0 325.0 Ø16.0
38.0 inserts R25.0 Ø10.0 allow M4 inserts Please note - this drawing contains
R25.0
100.0 Ø10.0 Ø10.0 Please note - this drawing contains indicative design Ø5.0 100.0 indicative design specification and is
specification and is for guidance only, it should be used
for guidance only, it should be used
allow M4 120.0 in conjunction with McDonalds instruction and site Ø5.0 Ø5.0 in conjunction with McDonalds
instruction and site specific
150.0 inserts 100.0 Ø16.0 Ø16.0 specific requirements. Client : 150.0 allow M4 inserts 100.0 20mm short of front panel requirements.
185.0 McDonalds 80.0 80.0 120.0 softwood batten stopped Client : McDonalds
a 1465.0 Ø5.0 100.0 100.0 Ø5.0 notes - Project : a 1465.0 Ø5.0 100.0 1062.0 Ø5.0 Project :
Various
1062.0 180.0 108.0 180.0 1065.0 1165.0 allow M4 inserts to front panel. Title : TV Wall - 1230mm Wide 180.0 190.0 1065.0 1165.0 Various
allow M4 insert to rear panel.
Title :
845.0 845.0 945.0 softwood battens to stop 20mm short of 2 KVS Monitors 845.0 415.0 415.0 845.0 945.0 notes - TV Wall - 1020mm Wide
compact panels.
4 KVS Monitors
1230.0 100.0 100.0 compact end closers to be set back by 3mm. Drawing No : 1020.0 allow M4 inserts to front panel. 20.0 Drawing No :
must be bonded using heat resistant glue.
KDM_McD_1230WALL_2KVS_04
2 KVS 520.0 520.0 Scale : Date : Contract No : 4 KVS 60.0 allow M4 insert to rear panel. KDM_McD_1020WALL_4KVS_03
softwood battens to stop 20mm short of compact panels.
plan Ø10.0 285.0 190.0 Ø10.0 red holes denotes 10mm through holes, in 1:10 @ A2 19/11/15 KDM1074 plan 340.0 285.0 108.0 compact end closers to be set back by 3mm. Scale : 1:10 @ A2 Date : 19/11/15 Contract No :
rear and front panels and 16mm countersunk
KDM1074
must be bonded using heat resistant glue.
Ø16.0 of front panel. red holes denotes 10mm through holes, in rear and front ar - I A
ar
Ø16.0 holes on rear face of rear panel and front face Drawn by : Checked by : Status : I Revision : Drawn by : Checked by : Status : Revision :
A
-
ref - W2 38.0 38.0 ref - N4 38.0 38.0 panels and 16mm countersunk holes on rear face of rear
panel and front face of front panel.
A2
A2
D4.32 OAT walls 2.0 09 August 2016