Page 149 - B6118-AEW-XX-XX-PP-A-0001_(P17)_Contractors Manual

DESIGN

THE CONTENTS OF THIS PROPOSAL, INCLUDING ALL THE CONTENTS OF THIS PROPOSAL, INCLUDING ALL
IDEAS, DRAWINGS, ARTWORK AND LAYOUTS ARE THE IDEAS, DRAWINGS, ARTWORK AND LAYOUTS ARE THE
3 KVS 3 KVS 3 KVS 3 KVS PROPERTY OF KDM SHOP FITTING. 4 KVS 4 KVS 4 KVS 4 KVS PROPERTY OF KDM SHOP FITTING.
THE CONTENTS OF THIS DRAWING MAY NOT BE
THE CONTENTS OF THIS DRAWING MAY NOT BE
front panel a rear panel - front view section a-a end elev REPRODUCED IN WHOLE OR PART WITHOUT THE front panel a rear panel - front view section a-a end elev REPRODUCED IN WHOLE OR PART WITHOUT THE
WRITTEN PERMISSION OF KDM SHOP FITTING. WRITTEN PERMISSION OF KDM SHOP FITTING.
1230.0 1230.0 WHEREVER FIGURED DIMENSIONS ARE GIVEN THEY 1230.0 1230.0 WHEREVER FIGURED DIMENSIONS ARE GIVEN THEY
ARE TO BE ACCEPTED IN PREFERENCE TO SCALED
ARE TO BE ACCEPTED IN PREFERENCE TO SCALED
SIZES. THE CONTRACTORS ARE RESPONSIBLE FOR SIZES. THE CONTRACTORS ARE RESPONSIBLE FOR
VERIFYING ALL DIMENSIONS. VERIFYING ALL DIMENSIONS.
Revisions : ar 3.0 Revisions : ar
Rev A : 02/12/15
Rev A : 02/12/15
Notes added.
50.0 392.0 392.0 50.0 392.0 3.0 50.0 392.0 392.0 50.0 392.0 Notes added.
38.0 38.0 38.0 38.0 635.0 38.0 38.0 38.0 38.0 635.0
Ø10.0 Ø10.0 Ø10.0 Ø10.0 635.0 Ø10.0 Ø10.0 Ø10.0 Ø10.0
945.0 Ø16.0 9.0 945.0 Ø16.0 12.0 Ø16.0 Ø16.0 9.0 520.0 183.0 183.0 520.0 12.0
Ø8.0
12mm compact 12mm compact rear panel 12mm compact 12mm compact rear panel
KVS 1 end closer softwood batten KVS 1 KVS 2 end closer softwood batten
9.0 1465.0 545.0 183.0 1465.0 3.0 12mm compact front panel 1465.0 Ø8.0 1465.0 3.0 12mm compact front panel
8.0 302.0 9.0 310.0 200.0 20.0 310.0 437.0 302.0 8.0 437.0 200.0 437.0
973.0 353.0 353.0 Ø8.0 plan detail at ends 973.0 506.0 630.0 110.0 Ø8.0 108.0 20.0 108.0 plan detail at ends
KVS 2 118.0 KVS 3 118.0 110.0 190.0 nts KVS 3 14.0 KVS 4 14.0 nts
320.0 506.0 190.0 9.0 108.0 200.0 Ø8.0 771.0 20.0 108.0 85.0 9.0 108.0 200.0 Ø8.0 571.0 771.0 section detail
14.0 14.0 Ø10.0 100.0 100.0 Ø10.0 461.0 571.0 Ø10.0 100.0 100.0 Ø10.0 461.0 nts
2585.0 520.0 520.0 100.0 285.0 183.0 285.0 183.0 2585.0 2585.0 520.0 520.0 100.0 285.0 261.0 285.0 190.0 261.0 2585.0 20.0
Ø10.0 190.0 Ø10.0 261.0 520.0 108.0 520.0 261.0 20.0 Ø10.0 190.0 Ø10.0 183.0 183.0 20.0
380.0 R5.0 Ø16.0 Ø16.0 380.0 R5.0 Ø16.0 Ø16.0 38.0 38.0 85.0
R5.0 100.0 38.0 38.0 20.0 3.0 12mm compact rear panel softwood batten stopped 20mm short of front panel 12mm compact front panel R5.0 R50.0 20.0 3.0
R50.0 12mm compact rear panel 12mm compact front panel 12mm compact rear panel softwood batten 12mm compact front panel
Ø5.0 Ø5.0 180.0 3 KVS softwood batten Ø5.0 Ø5.0 180.0 4 KVS
30.0 rear panel - rear view 30.0 rear panel - rear view
1320.0 1230.0 1405.0 1320.0 1220.0 1230.0
1120.0 20.0 1120.0 325.0 580.0 325.0
910.0 600.0 815.0 325.0 580.0 325.0 section detail 910.0 600.0 815.0 38.0 Ø5.0 38.0 Please note - this drawing
contains indicative design
392.0 38.0 Ø5.0 50.0 R25.0 R25.0 Ø5.0 38.0 392.0 allow M4 nts 392.0 50.0 R25.0 R25.0 392.0 allow M4 specification and is for
inserts
inserts
guidance only, it should be
100.0 Ø10.0 Ø10.0 Please note - this drawing contains indicative design 100.0 Ø10.0 Ø10.0 used in conjunction with
McDonalds instruction and site
specification and is for guidance only, it should be used
120.0 in conjunction with McDonalds instruction and site 120.0 Ø16.0 Ø16.0 specific requirements.
specific requirements.
150.0 allow M4 100.0 Ø16.0 Ø16.0 Client : 150.0 allow M4 100.0 Client :
inserts
inserts
185.0 185.0 McDonalds 185.0 185.0 1465.0 Ø5.0 McDonalds
a 1465.0 Ø5.0 Ø5.0 Project : a Ø5.0 Project :
100.0 100.0 Various 100.0 100.0 notes - 12mm compact rear panel softwood batten stopped 20mm short of front panel 12mm compact front panel Various
1062.0 180.0 108.0 180.0 1065.0 1165.0 notes - Title : TV Wall - 1230mm Wide 180.0 108.0 180.0 945.0 1065.0 1165.0 allow M4 inserts to front panel. Title : TV Wall - 1230mm Wide
allow M4 insert to rear panel.
allow M4 inserts to front panel.
845.0 845.0 945.0 allow M4 insert to rear panel. 3 KVS Monitors 845.0 1062.0 845.0 softwood battens to stop 20mm short of 4 KVS Monitors
compact panels.
compact panels.
1230.0 100.0 100.0 softwood battens to stop 20mm short of Drawing No : 1230.0 100.0 100.0 compact end closers to be set back by Drawing No :
KDM_McD_1230WALL_3KVS_05
KDM_McD_1230WALL_4KVS_06
3 KVS 520.0 520.0 compact end closers to be set back by 3mm. Scale : Date : Contract No : 4 KVS 520.0 520.0 3mm. 20.0 Scale : Date : Contract No :
must be bonded using heat resistant glue.
must be bonded using heat resistant glue.
plan Ø10.0 285.0 190.0 Ø10.0 1:10 @ A2 19/11/15 KDM1074 plan Ø10.0 285.0 190.0 Ø10.0 red holes denotes 10mm through holes, 1:10 @ A2 19/11/15 KDM1074
rear and front panels and 16mm countersunk
Ø16.0 holes on rear face of rear panel and front face countersunk holes on rear face of rear
Ø16.0 red holes denotes 10mm through holes, in Drawn by : Checked by : Status : I Revision : Ø16.0 Ø16.0 in rear and front panels and 16mm Drawn by : Checked by : Status : I Revision :
ar
-
ar
A
A
-
ref - W3 38.0 38.0 of front panel. ref - W4 38.0 38.0 panel and front face of front panel.
A2 A2
ref - H2 THE CONTENTS OF THIS PROPOSAL, INCLUDING ALL ref - H3 IDEAS, DRAWINGS, ARTWORK AND LAYOUTS ARE THE
THE CONTENTS OF THIS PROPOSAL, INCLUDING ALL
IDEAS, DRAWINGS, ARTWORK AND LAYOUTS ARE THE
INSTORE 2 KVS PROPERTY OF KDM SHOP FITTING. DRIVE THRU 3 KVS PROPERTY OF KDM SHOP FITTING.
front panel THE CONTENTS OF THIS DRAWING MAY NOT BE front panel THE CONTENTS OF THIS DRAWING MAY NOT BE
c d end elev sect c-c sect d-d rear panel REPRODUCED IN WHOLE OR PART WITHOUT THE c d end elev sect c-c sect d-d rear panel REPRODUCED IN WHOLE OR PART WITHOUT THE
WRITTEN PERMISSION OF KDM SHOP FITTING.
1230.0 200.0 1230.0 1230.0 200.0 1230.0 WRITTEN PERMISSION OF KDM SHOP FITTING.
WHEREVER FIGURED DIMENSIONS ARE GIVEN THEY WHEREVER FIGURED DIMENSIONS ARE GIVEN THEY
ARE TO BE ACCEPTED IN PREFERENCE TO SCALED ARE TO BE ACCEPTED IN PREFERENCE TO SCALED
325.0 580.0 325.0 SIZES. THE CONTRACTORS ARE RESPONSIBLE FOR 325.0 580.0 325.0 SIZES. THE CONTRACTORS ARE RESPONSIBLE FOR
300.0 VERIFYING ALL DIMENSIONS. 300.0 VERIFYING ALL DIMENSIONS.
100.0 kvs back boards Revisions : Rev A : 10/15/15 ar 100.0 Revisions :
Drawing revised to show cut-outs in mdf formers.
100.0 Ø50.0 Ø50.0 allow M6 125.0 dashed line denotes Drawing revised to show cut-outs in mdf formers. 620.0 620.0 620.0 100.0 Ø50.0 Ø50.0 Rev A : 10/15/15 ar ar
ar
Rev B : 08/01/16
Rev B : 08/01/16
Drawing revised to show additional holes in rear
inserts
panel. Mdf formers and battens removed.
120.0 Ø5.0 Ø5.0 KVS 1 RECESS KVS 2 RECESS front panel cut-out Rev C : 29/01/16 ar 3.0 3.0 120.0 Ø5.0 Ø5.0 panel. Mdf formers and battens removed.
Drawing revised to show additional holes in rear
Rev C : 29/01/16
ar
Holes in rear panel moved up by 200mm.
1080.0 1080.0 1080.0 100.0 inserts allow M4 Ø50.0 527.0 100.0 allow M4 Holes in rear panel moved up by 200mm.
inserts
Ø5.0 Ø8.0 180.0 Ø5.0 100.0 200.0 Ø8.0 195.0 398.0 195.0 200.0 100.0 RECESS KVS RECESS KVS Ø5.0 Ø8.0 Ø5.0 kvs back boards
allow M6
front panel cut-out
180.0 allow M6 80.0 380.0 380.0 80.0 380.0 80.0 180.0 allow M6 inserts dashed line denotes
3.0 3.0 66.0 Ø8.0 inserts Ø8.0 3.0 3.0 66.0 Ø8.0 inserts 183.0 KVS 3 RECESS
527.0 527.0 385.0 385.0 183.0 183.0 KVS 3 RECESS 176.0 385.0 385.0
536.0 Ø50.0
176.0 527.0 527.0 100.0
a 380.0 a RECESS KVS RECESS KVS 380.0 RECESS KVS 380.0 a 380.0 a RECESS KVS RECESS KVS 380.0 RECESS KVS 380.0 200.0 Ø8.0 195.0 398.0
2750.0 2595.0 2750.0 2595.0
KVS 1 RECESS KVS 2 RECESS 2295.0 KVS 1 RECESS KVS 2 RECESS 2295.0 536.0
3.0 3.0 2075.0 2195.0 3.0 3.0 2075.0 2195.0 Ø50.0 Ø50.0
435.0 425.0 435.0 425.0 1800.0 435.0 435.0 1975.0 435.0 435.0 425.0 1800.0 435.0 435.0 1975.0 100.0 200.0 Ø8.0 195.0 195.0 200.0 100.0
203.0 203.0 203.0 203.0 203.0 203.0 Ø8.0
183.0 183.0
58.0 VOID 3.0 58.0 VOID 58.0 VOID 3.0 58.0 VOID KVS 1 RECESS KVS 2 RECESS
1135.0 1135.0 3.0 1135.0 70.0 1135.0 3.0
b VOID b 3.0 3.0 VOID b VOID b 3.0 3.0 VOID
182.0 267.0 267.0 58.0 182.0 267.0 6mm compact rear panel 6mm compact front panel 182.0 267.0 267.0 58.0 182.0 267.0
155.0 360.0 360.0 12mm mdf 12mm mdf 155.0 360.0 360.0
182.0 182.0
12mm mdf
6mm compact
c d 3.0 c d
1230.0 12mm mdf 1230.0
269.0 Please note - this drawing Please note - this drawing
200.0 6mm compact rear panel 6mm compact KVS panel contains indicative design 200.0 6mm compact rear panel contains indicative design
specification and is for
specification and is for
top plan 3.0 12mm mdf guidance only, it should be top plan 3.0 12mm mdf guidance only, it should be
1230.0 used in conjunction with 1230.0 used in conjunction with
McDonalds instruction and
site specific requirements.
200.0 114.0 530.0 6mm compact 12mm mdf section detail - nts McDonalds instruction and 200.0 114.0 530.0 6mm compact 12mm mdf site specific requirements.
end closer
end closer
section a-a 134.0 Client : section a-a 134.0 6mm compact rear panel 6mm compact front panel Client :
1230.0
1230.0 12mm mdf McDonalds 12mm mdf McDonalds
6mm compact front panel 6mm compact front panel 12mm mdf 12mm mdf
366.0 Project : 366.0 top plan detail - nts Project :
200.0 VOID top plan detail - nts Various 200.0 VOID 12mm mdf Various
6mm compact
section b-b 6mm compact rear panel 6m Title : section b-b 6mm compact rear panel Title :
3.0 12mm mdf 3.0 Hub & Spoke Wall - 1230mm Wide 3.0 12mm mdf 3.0 3.0 Hub & Spoke Wall - 1230mm Wide
2 KVS Monitors (Instore) 12mm mdf 3 KVS Monitors (Drive Thru)
notes - 6mm compact 6mm compact VOID 6mm compact Drawing No : notes - 6mm compact 6mm compact VOID 6mm compact 6mm compact KVS panel Drawing No :
end closer
KDM_McD_1230HUB_3KVS_09
KDM_McD_1230HUB_2KVS_07
end closer
end closer 12mm mdf 12mm mdf closer panel end closer 12mm mdf 12mm mdf 12mm mdf 12mm mdf
closer panel
allow M6 inserts to KVS panels. Scale : 1:10 @ A1 Date : 20/11/15 Contract No : allow M6 inserts to KVS panels. Scale : 1:10 @ A1 Date : 20/11/15 Contract No :
allow M4 inserts to rear panel. 12mm mdf allow M4 inserts to rear panel. 12mm mdf
KDM1074
KDM1074
allow M6 inserts to rear panel. 6mm compact front panel 6 Drawn by : Checked by : Status : Revision : allow M6 inserts to rear panel. 6mm compact front panel Drawn by : Checked by : Status : I Revision :
ar
-
C
all compact end closers to be set back by 3mm. section b-b detail - nts ar - I C all compact end closers to be set back by 3mm. section b-b detail - nts
must be bonded using heat resistant glue. must be bonded using heat resistant glue. section detail - nts
A1 A1
ref - H4 THE CONTENTS OF THIS PROPOSAL, INCLUDING ALL THE CONTENTS OF THIS PROPOSAL, INCLUDING ALL
IDEAS, DRAWINGS, ARTWORK AND LAYOUTS ARE THE
IDEAS, DRAWINGS, ARTWORK AND LAYOUTS ARE THE
INSTORE 4 KVS PROPERTY OF KDM SHOP FITTING. 2 KVS 2 KVS 2 KVS 2 KVS PROPERTY OF KDM SHOP FITTING.
front panel THE CONTENTS OF THIS DRAWING MAY NOT BE THE CONTENTS OF THIS DRAWING MAY NOT BE
WRITTEN PERMISSION OF KDM SHOP FITTING.
c d end elev sect c-c sect d-d rear panel REPRODUCED IN WHOLE OR PART WITHOUT THE front panel a rear panel - front view section a-a end elev REPRODUCED IN WHOLE OR PART WITHOUT THE
WRITTEN PERMISSION OF KDM SHOP FITTING.
1230.0 200.0 1230.0 1020.0
WHEREVER FIGURED DIMENSIONS ARE GIVEN THEY 1020.0 WHEREVER FIGURED DIMENSIONS ARE GIVEN THEY
ARE TO BE ACCEPTED IN PREFERENCE TO SCALED ARE TO BE ACCEPTED IN PREFERENCE TO SCALED
SIZES. THE CONTRACTORS ARE RESPONSIBLE FOR
SIZES. THE CONTRACTORS ARE RESPONSIBLE FOR
300.0 325.0 100.0 580.0 325.0 VERIFYING ALL DIMENSIONS. VERIFYING ALL DIMENSIONS.
Revisions : Rev A : 10/15/15 ar Revisions :
620.0 620.0 620.0 100.0 Ø50.0 Ø50.0 Drawing revised to show cut-outs in mdf formers. 392.0 38.0 50.0 50.0 38.0 392.0 392.0 38.0 50.0 50.0 38.0 392.0 3.0 Rev A : 02/12/15 ar
Notes added.
ar
Rev B : 08/01/16
Drawing revised to show additional holes in rear
Rev C : 29/01/16
3.0 3.0 120.0 Ø5.0 Ø5.0 panel. Mdf formers and battens removed. Ø10.0 Ø10.0
ar
Holes in rear panel moved up by 200mm.
527.0 527.0 allow M4 100.0
100.0 inserts
176.0 752.0 752.0
Ø5.0 Ø8.0 Ø5.0
380.0 RECESS KVS RECESS KVS 380.0 80.0 RECESS KVS 380.0 80.0 180.0 allow M6 kvs back boards Ø16.0 Ø16.0 12.0
KVS 3 RECESS KVS 4 RECESS 3.0 3.0 385.0 66.0 Ø8.0 inserts 385.0 allow M6 9.0 20.0
inserts dashed line denotes Ø8.0 Ø8.0 12mm compact 12mm compact rear panel
front panel cut-out end closer
KVS 3 RECESS KVS 4 RECESS 733.0 KVS 1 KVS 2 733.0 1465.0 1465.0 3.0 softwood batten
a 80.0 380.0 a 2595.0 RECESS KVS RECESS KVS 380.0 RECESS KVS 380.0 Ø50.0 8.0 Ø8.0 Ø8.0 12mm compact front panel
2750.0 398.0 200.0 100.0 320.0 9.0 302.0 108.0 200.0 108.0 20.0 320.0
KVS 1 RECESS KVS 2 RECESS 2295.0 536.0 195.0 506.0 plan detail at ends
3.0 3.0 2075.0 2195.0 Ø8.0 183.0 Ø16.0 183.0 183.0 nts
435.0 435.0 425.0 435.0 435.0 1975.0 Ø50.0 Ø16.0 654.0
203.0 203.0 1800.0 203.0 Ø10.0 Ø10.0 Ø10.0 Ø10.0
100.0 200.0 280.0 415.0 415.0 280.0 454.0 60.0 415.0 415.0 60.0 454.0
58.0 VOID 3.0 58.0 VOID Ø8.0 195.0 2585.0 573.0 Ø16.0 190.0 Ø16.0 285.0 340.0 285.0 190.0 340.0 2585.0 20.0
1135.0 1135.0 3.0 183.0 Ø10.0 Ø10.0 Ø10.0 Ø10.0
70.0 KVS 1 RECESS KVS 2 RECESS
b VOID b 3.0 3.0 VOID R5.0 38.0 38.0 12mm compact rear panel softwood batten stopped 20mm short of front panel 12mm compact front panel
182.0 267.0 267.0 58.0 182.0 267.0 R5.0 R50.0 20.0 3.0
155.0 360.0 360.0
182.0 Ø5.0 180.0 2 KVS 12mm compact rear panel softwood batten 12mm compact front panel
1513.0 30.0 rear panel - rear view 1513.0
1020.0
c d
1230.0 1120.0 20.0
Please note - this drawing 325.0 370.0
contains indicative design 815.0
200.0 specification and is for 910.0 600.0 392.0 50.0 325.0 Ø16.0 392.0 allow section detail
6mm compact rear panel
top plan 3.0 12mm mdf guidance only, it should be Ø5.0 R25.0 Ø10.0 M4 inserts nts
1230.0 used in conjunction with 100.0 Please note - this drawing contains indicative design specification
and is for guidance only, it should be used in conjunction with
6mm compact McDonalds instruction and Ø5.0 Ø5.0 McDonalds instruction and site specific requirements.
200.0 114.0 530.0 end closer 12mm mdf site specific requirements. 150.0
section a-a 134.0 6mm compact rear panel 6mm compact front panel Client : allow M4 inserts 100.0 Client :
1230.0 12mm mdf McDonalds 80.0 80.0 120.0 McDonalds
6mm compact front panel 12mm mdf 12mm mdf 1465.0
366.0 Project : a Ø5.0 1062.0 Ø5.0 Project :
200.0 VOID top plan detail - nts Various 100.0 Various
12mm mdf 1165.0 notes -
section b-b 6mm compact rear panel 6mm compact Title : 180.0 190.0 1065.0 Title :
3.0 12mm mdf 3.0 12mm mdf 3.0 Hub & Spoke Wall - 1230mm Wide 845.0 415.0 415.0 845.0 945.0 allow M4 inserts to front panel. TV Wall - 1020mm Wide
allow M4 insert to rear panel.
2 KVS Monitors
4 KVS Monitors (Instore)
notes - 6mm compact 6mm compact VOID 6mm compact 6mm compact KVS panel Drawing No : 1020.0 softwood battens to stop 20mm short of compact panels. Drawing No :
compact end closers to be set back by 3mm.
KDM_McD_1020WALL_2KVS_01
end closer 12mm mdf 12mm mdf closer panel end closer 12mm mdf must be bonded using heat resistant glue.
KDM_McD_1230HUB_4KVS_08
allow M6 inserts to KVS panels. Scale : Date : Contract No : 2 KVS 60.0 340.0 340.0 60.0 Scale : 1:10 @ A2 Date : 19/11/15 Contract No :
plan
KDM1074
allow M4 inserts to rear panel. 12mm mdf 1:10 @ A1 20/11/15 KDM1074 285.0 108.0 panels and 16mm countersunk holes on rear face of rear
red holes denotes 10mm through holes, in rear and front
allow M6 inserts to rear panel. 6mm compact front panel Drawn by : Checked by : Status : Revision : panel and front face of front panel. Drawn by : Checked by : Status : I Revision :
all compact end closers to be set back by 3mm. section b-b detail - nts ar - I C
ar
A
-
must be bonded using heat resistant glue. section detail - nts ref - N2 38.0 38.0
A1 A2
D4.32 OAT Walls 2.0 09 August 2016