Page 106 - JGS4x4 CATALOGUE

> Off-Road

Anti-rattle Jack Clamps Bottle Jack Jack Bases

DA3153 Red ANR4489
DA3154 Black Bottle jack kit
DA3155 Yellow (LR031924 & KAH000050)
LR031924
Bottle jack
KAH000050
Handle for bottle jack (LR031924)

DA5607
Jack base
310 x 195 x 38mm
Grey with gritted surface for extra traction

DB1314
Ground Anchors

DA6541

Help to get yourself out of trouble... 10100111 NEW
ARB Jack Base
The ARB Jack Base is designed to suit your ARB
Jack® or Hi-Lift™ Jack providing a good surface area
to ensure good contact of the jack to the ground and
jack to the base. This provides a safer environment
for the user and increased performance of the jack by
limiting slippage or sinking into the ground you may
be jacking on.
DB1318 Features & Benefits
> 324mm x 304mm x 56mm
> Aleviates sinkage on soft ground for safer use
> 7000kg rated load capacity
DB1314 > Designed to suit your ARB Jack® or Hi-Lift™ and
DA6541 Ground anchor set - 600mm pins other suitable farm jacks.
Ground Anchor DB1318 > Heavy-duty high-density polyethylene construction
Pull yourself out of trouble with this Ground anchor bag set > High visibility safety orange
heavy-duty ground anchor. This anchor 2 x Pulling Power bags > Non-slip textured pattern on bottom of the Jack
utilises a Hi-Lift jack (not included). Note - ground anchor not included (DB1314) Base for extra grip
> Rugged construction meets all ARB standards for
Land Meters > Can be mounted on a TRED™ Pro mounting kit or
strength and durability
on the shaft of a Hi-Lift™ Jack using optional mounts
(sold separately)
> Easy and comfortable grab handle
> Can be used as a rake to level terrain
> Can be used as a wheel chock or jockey wheel
receiver
> Convenient leash attachment points for easy
retrieval of the Jack Base after use (sold separately
- TLOARB)
> Designed and made in Australia

Land Meters
> Independent twin meter.
> Convenient for seeing the pitching and rolling of the
DA1003 DA1004 vehicle body or terrain.
Double incline land meter Black Double incline land meter Carbon fibre effect > Transparent illumination for easy-to-see readings at
Lift Rod Kit night.

DA7531 DA7531
Fully adjustable suspension lift rod kit
Discovery 3/Discovery 4/Range Rover Sport - 2005 - 2013
“The ease of changing the ride height is what separates these rods from others in the marketplace.”
These adjustable rods replace the plastic and rubber parts Land Rover supply on the vehicle. Made from aluminium
with an industrial heavy grade rubber bushing, the aluminium parts are anodised black to help with corrosion
protection and blending in when in the garage for work.
The lift rods have two settings; standard and off-road. With the air suspension set to normal driving height the
lengthened rods will give you standard road and off road driving heights. If you shorten the rods the standard ride
height will be approx 50mm higher. If you select off-road height the vehicle will be in the ‘super extended’ position.
No tools are required and should take no more than 2 minutes to do all four rods.
Access to the front is over the front wheels and for the back is through the rear wishbones (blanket required!)
Note - If run for a long time in off-road position then wheels may need realigning.
110 www.britpart.com