Page 121 - JGS4x4 CATALOGUE

> Winching

Shackles & Pulleys

DA3160 DA3160A Swivel recovery eye - stainless steel - 36mm diameter & shackle (3.25 tons)
DA3160 Note - Not suitable for standard Land Rover bumpers

DA3160A Replacement shackle for DA3160
DB1009 Shackle - 1.4 ton
DB1353 ‘D’ shackle - 1.4 ton
DB1012 Shackle - 4.7 ton
DB1322 Swivel shackle
DB1323 Non-forged jate ring
DB1329 Forged jate ring
DB1008 Pulley hook - SWL loads - Pulling - 1,500kgs / Lifting - 750kgs
Snatch block
DB1002 High quality tempered steel. Maximum head load - 9,000kgs.

DB1009 DB1353 DB1012
See how easy it is to use these shackles
www.britpart.com/DA7336

DB1322 DB1323 DB1329

12-Strand Shackles
DA7336
DB1008 DB1002 Pair
Breaking load - 5,830kgs
More product Manufactured from 11mm 12-strand
images at UHMWPE rope with built in UV inhibitor. These are a lightweight, easy
and safe way of joining ropes and strops. Due to the much lower kinetic
www.britpart.com energy being stored, using these shackles is much safer in the event of a
rope or strop failure. Can also be used to attach ropes to standard towing
eyes without scratching the paintwork.
ARB Snatch Block 7000 ARB2091 DA8995
ARB2091
ARB’s easy to use 7,000kg snatch block doubles the
capacity of your winch and is suitable for a variety of
off-roading uses. Engineered tough for serious recovery.
Allows winching from awkward angles and incorporates
a grease nipple to ensure smooth pulley operation. Suits
mounted and portable vehicle winches.
Working Load 7,000kg
Breaking Strength 14,500kg
Side Plate Material 5mm cold rolled steel
Pulley Material Solid billet steel
Pulley Diameter 93mm
Cable Size 6mm - 12mm
Weight 3.5kg
Greasable Yes

ARB products available in the UK only. ARB Snatch Block 9000
DA8995
Feature side plates that sit snug against the pulley,
eliminating the possibility of the winch cable becoming
trapped between the pulley and the side plates. The
groove on the pulley itself tapers down to the centre
allowing for a variety of cable sizes (1/4”-1/2”) to be used
and ensures the cable is seated securely in the pulley,
minimizing lateral movement.

Features
> Works with steel or synthetic winch lines
> Light weight design
> Easy to use
> Doubles the capacity of your winch
> Allows winching from awkward angles
> Engineered tough for serious recovery
> Suits vehicle mounted and portable winches
> Vehicle recovery booklet enclosed

Specifications
Working load: 9,000kg (20,000lbs)
Breaking strength: 17,500kg (38,500lbs)
Side plate material: 6mm cold rolled steel
Pulley material: Specialized polymer
Pulley diameter: 110mm (4.3”)
Cable size: 8mm - 13mm (0.3”-0.5”)
Weight: 2.4kg (5.3lbs)
Photo courtesy of Aad Castlein
Greasable: Not required
www.britpart.com 125