Page 224 - JGS4x4 CATALOGUE

> Consumables

Britpart XD Oils DA1331 Britpart XD 10W-40 1 litre
5 litres
DA1530
Britpart XD10W-40
Product Description
Britpart XD 10W-40 is a semi-synthetic multi-grade engine oil manufactured using high quality additives and base
oils for fuel efficiency and superior performance for petrol and diesel engines of modern passenger cars and light
commercial vehicles. Meets ACEA and API specifications required by a large number of cars and light commercial
vehicles. The additive technology coupled with group 3 base fluids also ensures a high level of component protection
and cleanliness when operating in severe conditions with extended drain intervals. Engine design has changed rapidly
over recent years. Increased output from smaller units coupled with reduced engine oil sump capacity has put greater
demands on the lubricant. Britpart XD 10W-40 is designed to meet these challenges and is manufactured from a
balanced blend of top quality mineral and synthetic base stocks to produce a high quality engine oil with outstanding
properties. Its naturally higher lubricity offers lower internal friction which reduces engine wear and improves fuel
economy. It provides excellent stay in grade performance for a wide range of modern engines.
Applications
Britpart XD 10W-40 is suitable for normally aspirated and turbocharged diesel and petrol engines in passenger cars
and light commercial vehicles. It is miscible with all synthetic and mineral based engine oils.
Performance Levels
> ACEA: A3/B4 > MB: 229.5
> API: SL/CF > RN 0700/0710
> VW: 502.00/505.00
Benefits
> Improved fuel economy > Excellent cold starting
> Suitable for a wide range of vehicles > Improved oil consumption and emissions
> Excellent high and low temperature stability
Technical Data*
> SAE 10W-40 > Viscosity Index 152
> Specific Gravity @ 15°C (typical) 0.867 > Pour Point °C -35
> Kinematic Viscosity @ 100°C cSt 14.51 > Flash Point COC (°C) 220 *These are typical
test results and don’t
> Kinematic Viscosity @ 40°C cSt 100.00 > TBN (mg KOH/g) 10.2 constitute a specification.
Multi-grade engine oils
manufactured using high

quality additives

DA1333 Britpart XD 5W-30 1 litre
DA1529 Britpart XD 5W-30 5 litres
Product Description
Britpart XD 5W-30 is fully synthetic multi-grade and fuel efficient engine oil meeting the latest Ford specification.
Formulated with highly refined synthetic base stocks and the very latest in advanced additive technology. The carefully
selected components combine to provide the user with improved fuel economy benefits, greater robustness to fuels
containing increased levels of bio-diesel and superior soot handling properties. This highly stable, stay-in-grade
product allows extended oil drain intervals to be achieved.
Applications
Britpart XD 5W-30 is suitable for normally aspirated and turbocharged, petrol and diesel vehicles, particularly the
more modern vehicles. It is also recommended for use in all Ford engines where the latest Ford WSS-M2C 913-D is
specified.
Performance Levels
> ACEA: A5/B5 > STJLR 03.5003
> API: SL/CF > RN 0700
Benefits
> Extended drain capacity > Excellent low temperature stability for improved flow
> Fully backwards compatible with the earlier rates
specifications of WSS-M2C, 913-A, 913-B > Improved fuel efficiency
> Stay-in-grade formulation > Fully Synthetic formulation
Technical Data*
> SAE 5W-30 > Viscosity Index 164
> Specific Gravity @ 15°C 0.850 > Flash Point (COC °C) 220
> Kinematic Viscosity @ 100°C cSt 11.29 > Pour Point °C -38 *These are typical
test results and don’t
> Kinematic Viscosity @ 40°C cSt 66.51 > TBN (mg KOH/g) 8.9 constitute a specification.

DA1822 NEW Britpart XD 20W-50 1 litre
DA1823 NEW Britpart XD 20W-50 5 litres
DA1824 NEW Britpart XD 20W-50 20 litres
Product Description
Britpart XD 20W-50 is a traditional mineral oil based engine oil suitable for use in gasoline fuelled passenger cars and
light duty diesel vehicles. It is formulated from a blend of top quality solvent refined mineral base oils with established
detergent/dispersant additive technology and incorporating viscosity index improver polymers to deliver the 20W-50
multi-grade viscosity profile. The 20W-50 viscosity grade classification is designed for severe service conditions and
ensures optimum lubrication protection and engine performance in warmer climate conditions.
Applications
Applications for the 20W-50 are older model petrol vehicles fitted with an oil filter, especially V8’s and 200Tdi/300Tdi
high mileage vehicles with excessive oil consumption. Also to be used in hot climates where a 15W-40 is normally
recommended. Not suitable for TD5 onwards.
Performance Levels > API: SL/CF
> ACEA: A3/B3 > MB: 229.1
Benefits
> High temperature performance > Excellent sludge control protection designed for stop-
> Protects against ring sticking at high temperatures go city motoring
> Maintains oil performance > Long lasting dispersant, anti-wear and corrosion
> Minimises oil consumption protection
> High standard of engine cleanliness
Technical Data*
> 20W-50 > Viscosity Index 133
> Specific Gravity @ 15°C 0.885 > Flash Point (COC °C) 220
> Kinematic Viscosity @ 100°C cSt 18.2 > Pour Point °C -30 *These are typical
test results and don’t
> Kinematic Viscosity @ 40°C cSt 153 > TBN (mg KOH/g) 9 constitute a specification.
228 www.britpart.com