Page 240 - JGS4x4 CATALOGUE

> Workshop Tools

Other Workshop Tools - continued

DA1875 NEW DA1876 NEW DA1878 NEW DA1877 NEW
Laser Torx Fixing Extractor Set - 11 Piece Laser Damaged Cap Head Bolt/Screw Laser Damaged Nut/Bolt Laser External Deburr/Chamfer Tool
An essential workshop tool for extracting Extractor Set - 11 Piece Extractor Set - 12 Piece External deburr/chamfer tool fitted with
Torx fixings. For removing damaged hex bolts and This kit is made up of a set of cleverly HSS blade for repairing damaged bolts.
> Manufactured from S2 silicon steel screws. designed hexagon bolt and nut extractor Effective on Stainless Steel, hardened
> 7 x Extractors with 6mm Hex drive (quick > 7 x ¼” Hex shank adaptor caps. The caps fit over the steel, mild steel, copper, brass, wood,
chuck) Sizes - 1.5mm, 2mm, 2.5mm, 3mm, 4mm, rounded off fixing and allow a standard 12 fibreglass, hard plastic.
Sizes - E10, E15, E20, E25, E27, E30, E40 5mm, 6mm x 50mm long. point socket or ring wrench to be used to > Size range 3 - 19mm
> 3 x Extractors with 10mm Hex drive > 3 x 10mm Hex shank x 7mm, 8mm, 10mm remove the rounded off hexagon fitting. > Speed 0 - 400rpm
Sizes - E45, E50, E55. x 38mm long. > Sizes: 8mm, 9mm, 10mm, 11mm, 12mm, > High Speed Steel blade ¼” shank
> ½”D x 10mm Hex adaptor > ½”D x 10mm Hex adaptor 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, In a busy workshop there are numerous
> Storage case > Storage case 19mm. instances of threads getting damaged:
More information @ > Specially hardened steel components whacking a track rod end with a hammer;
www.britpart.com/DA1875 finished in black. cutting a bolt or threaded rod - the
DA1698 NEW > Can be used on up to 65% rounded threaded ends get torn and squashed.
All-In-One Stud & Hub Cleaning Tool nuts. Wheel studs get damaged just by
Stud Kleen attaches firmly to a standard impact wrench, > Due to material used, the tools should removing and refitting the wheels… Luckily
providing the fastest and safest cleaning solution for your be considered consumable. Following there is a quick and easy solution - the
wheel changing process. The face of the tool moves the instructions for use will help external deburr & chamfer tool.
rust and contaminants in seconds, providing a smooth significantly increase the service life of More information @
clean surface for ease of assembly of all mating parts. At the kit. www.britpart.com/DA1877
the same time, stainless steel tines effectively clean the More information @
threaded studs assuring easy and accurate torquing of www.britpart.com/DA1878
lug nuts. The proprietary abrasive material is significantly Clutch Tools
longer lasting than any other material on the market.
Features
> Cleans the hub and stud at the same time Clutch Alignment Tool
> Fits to 1/2” impact DA1147
> Single size for all passenger cars and light trucks Defender - 2007 onwards
> Won’t damage your wheels Discovery 3 - TdV6 manual
> Dense, long lasting abrasive pad Replace two tools for one with this cost
> Hundreds of internal stainless steel tines instantly & effective clutch tool. One end is the Land
effectively clean threaded studs Rover 308-419 clutch alignment tool
> Stack tolerances when balancing wheels will improve which is used to align the clutch disc and
and ensure proper torque tensioning during installation pressure plate on installation. The other
> Cleans approximately 800 wheels end of the tool is Land Rover 303-1096
aligner/installer tool which is used to align
the clutch drive plate and install the spigot
The tool bearing.
moves Clutch Alignment Tool
DA6113
rust and Defender - 2.4 TD4 - 2007 onwards
Specifically designed to hold the clutch
contaminants centre plate centred on the flywheel while
fitting the clutch cover plate. Ensures fast
effective alignment of the clutch centre
in seconds! plate. 200mm long x 14mm dia with knurled
grip. Equivalent to OEM 308-419.

Photo courtesy of John Pickworth
244 www.britpart.com