Page 2 - SELECTA • 3M COLD SHRINK SOLUTIONS FOR LOW VOLTAGE

3M Cold Shrink Solutions for Low Voltage
™

Your trusted connection.

Every time.

Cold shrink technology—for quick, easy

and reliable low voltage installations

Introduced by 3M, cold The installation process is simple. Slide the factory
shrink technology allows expanded and assembled rubber sleeve beyond one
you to create water-tight of the cable ends. Splice the cable ends. Slide the
seals without applying heat. sleeve over the splice. Pull out the removable core—
and you’ve just created a dynamic, compressive seal
Without using any special that connects, protects and insulates.
tools and without taking
any extensive training. Start using our low voltage cold shrink solutions and
experience quicker, simpler installation. Consistent
performance, long term reliability while providing a
'living' seal.

Inside the technology

3M cold shrink products Operating Dielectric Tensile Ultimate
are made of EPDM or Color Temperature Strength Strength Elongation Testing
silicone rubber. Both Range (V/mil) (PSI) (%)
materials offer water-tight Meets ANSI
seals. Silicone offers C119.1 water seal
all the benefits of EPDM EPDM -40°C to 90°C requirements
with added UV resistance Rubber Black (-40°F to 194°F) 365 1400 750 WF Series is UL
and a greater service listed for direct bury
temperature range. and underwater
sumbersion
Meets ASTM D750
and G23 for UV
Silicone -55°C to 260°C Not Resistance
Rubber Gray (-67°F to 500°F) 554 1240 Measured Meets Flammability
Requirements
Test of BSS 7230