Page 7 - RUST-OLEUM PRODUCT CATALOG (July 2014) 100-PAGES

FLOORING APPLICATIONS (continued)
FEATURES RECOMMENDED PRODUCT PAGE PRIMER SURFACE PREPARATION*
CONCRETE
2-3 times tougher than concrete; superior abrasion, FastKote UV – 85 Self-priming or Penetrating Prime Chemical clean and abrasive
®
impact and chemical resistance. UV Stable Polyurea Floor Coating 77 & Seal Primer S6511413 blast or acid etch
™
Superior long-term solvent, chemical and abrasion
Chemical clean and abrasive
9100 System –
Self-priming
MILD MODERATE SEVERE wear, dusting, staining. Fast cure formula. Fast Cure Epoxy Floor Coating 76 Self-priming blast or acid etch
DTM Epoxy Mastic
resistance; resists light to moderate wheeled traffic.
blast or acid etch
Chemical clean and abrasive
6200 System –
78
For interior/exterior concrete floors. Protects against
Self-priming
No solvent odor, zero VOC, zero HAP; gloss finish; light to
S40 or S42 System –
Chemical clean and abrasive
Water-Based Epoxy Floor Coating
blast or acid etch
med. vehicle traffic; where spills of mild chem. may occur.
75
Resists heavy foot traffic and lightweight rubber tire
6000 System –
Self-priming
Chemical clean and abrasive
blast or acid etch
Water-Based Epoxy
vehicle traffic; withstands intermittent mild chemical spills.
Self-priming
For interior/exterior concrete and wood floors;
6711 System –
80
Chemical clean and abrasive
Clear Water-Based Polyurethane
protects against light traffic, weather and staining.
Chemical clean and abrasive
For interior concrete floors. Protects new or old
®
Epoxy Maintenance Floor Coating
concrete or previously coated floors.
blast or acid etch
Clean/degrease and hand
Low odor, resists lightweight rubber wheel traffic, mild EasyClear – 80 Self-priming blast or acid etch
75
Self-priming
5600 System –
stains, mildew and eliminates dusting. Acrylic Urethane Floor Paint tool or power tool clean
Low odor, UV resistant, satin finish; resists light 5500 System – 79 Self-priming Clean/degrease and hand
traffic, mild stains and eliminates dusting. Acrylic Dustproofer Floor Sealer tool or power tool clean
STEEL DECK
SEV. Direct-To-Metal; superior long-term solvent, chemical 9100 System – 47 Self-priming SP1+SP3
DTM Epoxy Mastic
and abrasion resistance; maximum corrosion protection.
ANTI-SLIP
For continuous vehicle and equipment traffic; strong AS6500 System – 83 Self-priming SP1 and abrasive blast or
acid etch
Anti-Slip 100% Solids Epoxy
chemical exposure.
MILD MOD. SEVERE chemical exposure. Anti-Slip High Performance Epoxy 81 Self-priming acid etch
82
Self-priming
For heavy vehicle and equipment traffic; strong
SP1 and abrasive blast or
AS9100 System –
AS5400 System –
SP1 and abrasive blast or
For heavy foot traffic and/or light vehicle traffic.
Anti-Slip One-Step Epoxy
acid etch
For barefoot and light recreational pedestrian traffic;
AS6000 System –
SP1 and abrasive blast or
82
Self-priming
Anti-Slip Low-Profile Epoxy
low odor.
AS5600 System –
SP1 and abrasive blast or
For mild industrial environments; fast dry, low odor
acid etch
Anti-Slip Low–Medium Profile Acrylic 81 Self-priming acid etch
WATER-IMMERSION ENVIRONMENTS
Apply above 60˚F (15˚C). Not recommended for 9100 System – 47 Self-priming SP1+SP10
potable water tanks. Use with 9102402. DTM Epoxy Mastic
SEVERE Protects against severe abrasion, strong chemicals C9578 System – 49 Self-priming SP1+SP10
and non-potable water immersion.
Coal Tar Epoxy
Tank of 6,000 gallons minimum. W9200 System – 49 Self-priming SP1+SP10
for Potable Water
HIGH HEAT ENVIRONMENTS
Resists heat from 500-1200˚F (260-649˚C). 4300 System – High Heat Coating Pure 61 Self-priming SP1+SP10
Silicone Aluminum (4315)
Resists heat from 300-800˚F (149-426˚C); fights corrosion 4200 System – High Heat Coating 61 Self-priming SP1+SP6
SEVERE through cathodic sacrificial action; two coats required. 4200 System – High Heat Coatings 61 4200 System – High Heat Primer SP1+SP6
Gray Zinc-Sele (4285)
Resists heat from 300-800˚F (149-426˚C).
Resists heat up to 350˚F (177˚C); Leafing/Heavy-Duty Aluminum (470/473) 61 X60402 SP1+SP3
no heat cure required.
WALLS, DOORWAYS, TRIM
Low odor; low VOC, soap & water clean up C580 System – 60 Self-priming Remove loose peeling paint;
dull glossy surfaces by sanding
Commercial Latex
MODERATE No solvent odor, zero VOC, zero HAP; high durability S60 System – 54 GRIPTEC Acrylic Primer SP1+SP3
™
epoxy for use in extreme areas.
Epoxy Maintenance Coating
No solvent odor, zero VOC, zero HAP; attractive; Beyond Acrylic Enamel 52 Self-priming or GRIPTEC SP1+SP3
™
™
durable; extremely versatile; interior or exterior use. Acrylic Primer
* Minimum surface preparation required.
6 RUST-OLEUM INDUSTRIAL BRANDS PRODUCT GUIDE Customer Service: 1-800-553-8444 7