Page 8 - June 2025 newsletterf

6/6 Mary Bunzel 7/3 Joe Herling
6/6 Jackie Williams 7/3 Jim Siering
6/6 John Stolle 7/5 Noralee Dreske
6/10 Gary Lavota 7/10 Shirley Jacques
6/12 Dan Schaefer 7/10 Ed Landsittel

6/12 Rusty Rose 7/14 Arley Harriman
6/14 Keith Ponath 7/17 Susan Duffy

6/14 Ester Newman 7/30 Joe Bunzel
6/20 Denise Malmquist

CTCW is looking for a Newsletter Editor and a Webmaster. They can be Separate
People.
Jim Rugg has been doing the Newsletter and Website for nearly 15 years and has
served on the board for over 30 years and he needs a break. He is more than willing to
work with you to learn the software.

Submitted By Steve Heinemann

Find A Current Draw

You will need to measure the draw with key off by putting a Amp Meter
between the positive post and the positive cable, or using a Current Clamp On
Meter to measure draw on positive cable. It shouldn’t be more than say 80 ma.
If it’s above that, something is drawing current. To help isolate that, pull fuses
one at a time until the draw drops back to less than 80ma. When it does, that
identifies the circuit where the draw is and helps isolate the offending component.
Good luck

Birds Of A Feather Page 8