Page 42 - Bernardon Response to RFP-CRISP Bldg 709

www.bernardon.com
■ Based upon the selected scheme, prepare
a perspective rendering of the building
exterior.
■ Prepare a code review for applicable
building and life safety codes.
■ Review necessary structural modification
to existing frame.
■ Review alternatives for MEP systems.
■ Prepare a Basis of Design for MEP systems
based upon the selected systems.
■ Prepare a narrative describing the scope of
the project, which can be used by the CM in
preparing a preliminary cost estimate.
■ Attend a maximum of four (4) meetings to
review the progress of the design.
Phase III – Design Development
Based upon the approved Schematic Design
documents, we will perform the following tasks:
■ Prepare plans, elevations, and sections to
describe the shell and core.
■ Select exterior materials and colors.
■ Prepare a Finishes Presentation Board
showing interior materials and colors for
lobbies and toilet rooms.
■ Prepare preliminary structural framing
modifications plans.
■ Prepare preliminary MEP plans.
■ Review drawings prepared by MRA
Development Services, Inc.’s Civil Engineer
for coordination with the building design,
including the utility services to the building.
■ Attend a maximum of three (3) meetings to
review the progress of the design.
■ Provide a Design Development package,
including architectural, structural, and
MEP design.
BERNARDON | Response to Request for Proposals | MRA Development Services, Inc.
Chestnut Run Innovation & Science Park | Single Tenant Laboratory & Office Building | July 19, 2021 Page 36
Phase IV – Construction Documents
Based upon the approved Design Development
documents, we will perform the following tasks:
■ Prepare architectural, structural, MEP,
and interior design documents suitable
for bidding, permitting, and construction
of the project.
■ Coordinate the drawings with information
provided by tenant’s equipment vendors.
■ Coordinate our services with the CM and
the approved construction budget.
■ Attend a maximum of three (3) meetings
to review the progress of our services.
■ Provide signed and sealed drawings for
use in the building permit application
process.
Phase VI – Bidding and Construction
Administration
■ Assist MRA Development Services, Inc. and
the CM in obtaining competitive bids from
subcontractors by responding to Requests
for Information (RFI) that arise during the
bidding period.
■ Attend construction meetings at the site
at regular intervals. We have included
a maximum of eight (8) site meetings.
Structural and MEP consultants will visit
the site three (3) times each at appropriate
times based upon the progress of the work.
■ Review shop drawings submittals as
required by the Construction Documents.
■ Respond to contractor RFIs via narrative
and/or graphic means.
■ Perform final review of contractor’s punch
list.