Page 14 - i-Pilot Link Owner's Manual
P. 14

DISPLAY SCREEN








         TALON DASHBOARD



                                                                          Rough Water Mode
                                                                            In Rough Water Mode, the Mode LED Indicator on
                                                                            the Indicator Panel will be lit red. In Rough Water
                                                                            Mode, the Auto Deploy will operate with maximum
                 Depth        Mode         Talon                            down-force with three Auto-Drive cycles of three
           Talon  Indication  Talon   Depth   Status                        hits each, spaced 3 seconds apart. The three Auto-
           Status     Selection   Indication                                Drive cycles will be spaced at 10 second intervals.
                                                                          Soft Bottom Mode
                  Talon Selection - Both                                    In Soft Bottom Mode, the Mode Indicator LED will

                    Indicates both the Port and Starboard Talons are        be lit green on the Indicator Panel. In Soft Bottom
                    selected and will be controlled while operating.        Mode, the Auto Deploy will operate at a reduced
                    Press to toggle between left, right and both Talons.    power with a single hit. During calm conditions or
                    This option is only seen when the remote is set up      on water with muddy or soft sandy bottoms, Soft
                    to control two Talons.                                  Bottom Mode will prevent the Talon from
                  Talon Selection - Left                                    over-anchoring.

                    Indicates the left Talon is selected and will be      Talon Retracted
                    controlled while operating. By default the left Talon   Indicates that the Talon is fully retracted.
                    is the Port side Talon when multiple Talons are
                    installed and paired. This can be changed in the      Talon Anchored
                    Talon Options menu.                                     Indicates the Talon is anchored
                  Talon Selection - Right                                 Manual Retract

                    Indicates the right Talon is selected and will be       Indicates that the Talon has been placed into
                    controlled while operating. By default, the right       Manual Retract Mode.  This may apply to the left,
                    Talon is the Starboard side Talon when multiple         right or both Talons.
                    Talons are installed and paired. This can be
                    changed in the Talon Options menu.
                  Standard Mode                                      NOTICE: When the Talon Menu is displayed on the i-Pilot
                                                                                                   , Prop  , Steer
                                                                     Link remote, pressing the Spot-Lock
                    Standard Mode is the default anchoring Mode      Left  , Steer Right  , Speed Up    or Speed Down
                    for Talon. In Standard Mode, Talon's Auto Deploy   buttons changes the Display Screen to the i-Pilot Link
                    will operate with maximum down-force with a      Home Screen.
                    complete Auto-Drive cycle of three hits spaced at
                    three seconds apart. When put in Standard Mode,
                    the Mode Indicator LED in the Indicator Panel will
                    toggle between red and green and then turn off.
















       14  |  minnkotamotors.com                                                         ©2019 Johnson Outdoors Marine Electronics, Inc.
   9   10   11   12   13   14   15   16   17   18   19