Page 15 - i-Pilot Link Owner's Manual
P. 15

DISPLAY SCREEN








         i-PILOT LINK HOME SCREEN BUTTONS


                  Legacy AutoPilot                                        System

                    The AutoPilot button is used to engage and              Press the System button to open the System menu
                    disengage Legacy AutoPilot.                             and adjust settings within the i-Pilot Link system.
                  Advanced AutoPilot                                      Options

                    The AutoPilot button is used to engage and              Press the Options button to open the Options menu
                    disengage Advanced AutoPilot.                           and adjust options within the i-Pilot Link system.
                  Record                                                  Go To Spot-Lock

                    The Record button is used to start and stop             The Go To Spot-Lock button is used to open a
                    recording an iTrack.                                    menu used to navigate to a Spot-Lock location. The
                  HSB                                                       i-Pilot Link system will only bring up Spot-Locks
                                                                            within a quarter mile range.
                    Select the HSB (High Speed Bypass) button to
                    engage High Speed Bypass. High Speed Bypass           Go To iTrack
                    automatically sets the Prop speed to 10. Double         The Go To iTrack button is used to open a menu
                    press to engage. Single press to disengage.             used to navigate to an iTrack. The i-Pilot Link
                  Lock Keys                                                 system will only bring up iTracks within a quarter

                    Press and hold the Lock Keys button to lock the         mile range.
                    buttons and touch screen. Pressing and holding the    Go To Waypoint
                    Screen Navigation   button also locks and unlocks       The Go To Waypoint button is used to open a menu
                    the remote buttons and touch screen.                    used to navigate to a Waypoint location. The i-Pilot
                  Cruise Control                                            Link system will only bring up Waypoints within a
                                                                            quarter mile range.
                    Press the Cruise Control button to enable or disable
                    Cruise Control. Once Cruise Control is enabled,       Ulterra t
                    pressing the Speed Up    or Speed Down                  The Ulterra button is used to access functions
                    buttons will change the Target Speed rather than        specific to controlling the Ulterra.
                    the Prop Speed.                                       Talon
                  Mark Waypoint                                             The Talon button is used to access functions
                    Press to mark a Waypoint.                               specific to controlling Talon(s) on the
                                                                            i-Pilot System.



















       t Only available with Ulterra.      n Only available with Ultrex.


       ©2019 Johnson Outdoors Marine Electronics, Inc.                                                 minnkotamotors.com  |  15
   10   11   12   13   14   15   16   17   18   19   20