Page 83 - i-Pilot Link Owner's Manual

TALON CONTROLS

Toggle the Work Light

WARNING Work Light

The Work Light on the Talon is not intended for navigational
purposes. The Work Light does not replace or act as a Talon
substitute for proper navigation lighting of your vessel. Failure
to properly light your boat may cause harm or serious injury.

1 a. Press the Home button. 1a 12:53 PM 1b Spot-Lock G G GoTo
o
T
T
o
o
o
o
o
G G GoTo
o
T
T
T
T
T
T
T
T
o
T
iTrack
PROP SOG
b. Scroll through the Content Area using either your
finger or the Screen Navigation button to find the
mph
Talon button. M Mark k G GoTo o
r
a
T
T
o
o
T
T
T
o
TEMP 73 °F BRG 359° DPTH 25 ft Waypoint Waypoint
c. Select the Talon button using either your
finger or by pressing the Ok button to open the
Talon Menu.
Autopilot Cruise Control Options System
Record HSB Ulterra
T
o
T
T
T
T
o
G GoTo G GoTo
o
o
T
T
T
T
T
o
o
o
o
Spot-Lock iTrack Lock Keys
2 d. Once in the Talon Menu, find the Talon Work Light 2d 2d
button, and select it. This opens the Talon Work
Light Menu.
d. Once in the Talon Work Light Menu, scroll through
to find the Work Light Work Light button.
e. To toggle the Work Light, press the Work Light Work Light
button. The Toggle will turn green to indicate the
Work Light is turned "on".
f. To exit the menu, select either the Back Back button
Home
or the Home Home button.
Back
NOTICE: When the i-Pilot System is paired with
two Talons, toggling the Work Light on the i-Pilot
Link Remote for one Talon will toggle the Work
Light for both Talons.
©2019 Johnson Outdoors Marine Electronics, Inc. minnkotamotors.com | 83