Page 100 - Manual_Movie Edit Pro 2021_EN_Neat

100

Presets displayed with MPEG record directly in MPEG format.

Tip: Use the presets marked MPEG if you want to burn your recordings straight
away, since smart encoding can omit laborious encoding after recording.

Advanced...: Opens the video driver settings dialog (view page 100).

Capture control: Here you'll find the "Red" record and "Stop" buttons. With them, you
can start and stop recording.

Timer recordings active/time limit: Here you can specify a recording start time and
length, and thus turn your PC into a fully functioning VCR.

Snapshot!: With the "Snapshot" button, you can create a still image directly from the
preview monitor. The images are saved in the recordings folder as graphics files in the
resolution you have set.

Recording details: This shows statistical information such as the recording time,
available space on the hard-drive, the recorded frames, and the “dropped” frames.
Dropped frames are frames that have been left out because the computer processor
is too slow for the selected image format and cannot accept all incoming frames.

Preview: Some graphics adapters allow you to reduce the system lead by deactivating
the video preview. If you hear an "echo", deactivate the audio preview.

Advanced configurations in the video capturing dialog

Here you can adjust certain settings for the video recording driver.

These dialog boxes, so-called “property sheets,” come with the video card drivers.
These driver-specific performance properties may deviate depending on the cards.
We also have a very limited influence on the behavior of these drivers. If you
encounter any difficulties, please contact the video card manufacturer for the latest
driver updates.

Source: Sets the crossbar of the video card.

The crossbar determines which video and audio input signal will be recorded. The
crossbars are connected in series to the video recording chip itself. In the output field,
the video output (for the crossbars) is the input for the recording chip (video or audio
decoder-in) of the video card. In the “Input” field, select the signal source that will be
used by the video card to capture for this input. Many video cards have separate
crossbars for audio and video. If you have a problem, try out the different
configurations until the right sound matches the right image.

www.magix.com