Page 104 - Dante Controller User Guide
P. 104

Dante Controller User Guide









































               You can apply a role to the same physical device from which it was created (if it exists in the target
               network), or to a different device in the same network, or to another device in a new network.

               When a role is applied to the same physical device, or a device of the exact same model, the configuration
               and routing should be replicated perfectly (although some subscriptions may be 'broken', if the relevant
               transmitters are not also present on the target network).


                    Note: This makes presets an ideal way to backup and restore configurations for relatively static
                    networks.

               If a role is applied to a different device model or a different type of device, the configuration and routing may
               not be replicated exactly - the success of the role assignment will vary depending on the functionality and
               channel support of the target device.
               Applying a role to a fundamentally different type of device may not be very successful. For example,
               applying a role for a fully-subscribed 32-channel mixing console configured at 96kHz to a 2-channel
               amplifier that only supports 48kHz will be problematic - only two channels can be subscribed (assuming
               the transmitters are also present), and the sample rate will be rejected.

               You can apply a role to multiple devices. You cannot apply multiple roles to one device.
               To see which devices a role has been assigned to, click the role. The assigned device/s will be highlighted
               in the 'Target Devices' column.

               Automatic Assignments
               Dante Controller will automatically assign roles to devices, based on the following rules:
                  n If there is a perfect device match (i.e. the physical device in the original network from which the role
                    was created is also found in the target network), the role is assigned automatically
                  n If there is a device name match, the role is assigned automatically









             Copyright © 2020 Audinate Pty Ltd. All rights reserved.                                 -104-
   99   100   101   102   103   104   105   106   107   108   109