Page 86 - Dante Controller User Guide

Dante Controller User Guide

Rack Sample Rate

The sample rate at which the rack is currently set to.

Rack Mute Status

The mute status of the rack.

Avid Dante card Control
This section allows high-level configuration of the DNT-192 card.

Card Configuration

In ‘Dante’ mode the card configuration is automatically set by the rack. In ‘Generic’ mode the configuration
is manually selectable.
The Card Configuration option supports 3 values:
n Input card: The card functions as a 16-channel input device
n Output card: The card functions as a 16-channel output device
n Input/Output card: The card functions as an 8-in + 8-out device

SRC

Sample Rate Conversion.
When enabled, the card will convert incoming (Rx) audio to the Rack Sample Rate (if required), and
outgoing (Tx) audio to the sample rate of the receiving device on the Dante network (if required).
Note that SRC adds latency of roughly 1.3ms to the Dante subscription in each direction.

Card Identity

n Dante: The card will identify itself as a Dante device to the host device rack, enabling Dante func-
tionality on the host device. Required for Dante-enabled host equipment.
n Generic: The card will identify itself as a generic digital audio interface (required for non-Dante host
equipment).

Multicast Transmit Flow Configuration

Click the 'Create a new multicast flow' button in Device View to open the Create Multicast Flow dialog.

Copyright © 2020 Audinate Pty Ltd. All rights reserved. -86-