Page 82 - Dante Controller User Guide

Dante Controller User Guide

AES67 Config

For supported devices (Brooklyn II v3.9.x devices and up), the Device View also includes an AES67
Config tab. The AES67 Config tab allows the selection of AES67 mode for the device.

AES67 is a standard for audio over IP interoperability.
Devices in AES67 mode are able to transmit and receive AES67 multicast flows to / from non-Dante
AES67-enabled devices. Between Dante devices, Dante's native audio transport protocol is used instead
(even when AES67 is enabled for both devices).

Note: When the device is enrolled in a domain, AES67 configuration is controlled via DDM instead,
and the AES67 tab is not available.

AES67 Mode
Select Enabled to enable AES67 mode for the device.
Use the Create Multicast Flow panel to create AES67 flows.

RTP Multicast Address Prefix
You can use the RTP Multicast Address Prefix field to specify a multicast subnet, for cases where you
need to transmit to or receive from a particular address range.

Copyright © 2020 Audinate Pty Ltd. All rights reserved. -82-