Page 50 - seo2eja5.jay

Operating

Modulation Open the menu by double-tapping on [Modul1] or [Modul2] in the FX menu.

1 Effects selection
2 [Type]: Use the right arrow button to open the selection list [Select] and select the desired effects type from:
‘Chorus Slow/Fast’, ‘Flanger Slow/Fast’, ‘Celeste Slow/Fast’, ‘Rotor Slow/Fast’.
3 [Dry – Wet]: Controller to adjust the effect portion of the unprocessed signal in a range of 0…100. Default setting: 0.
4 [EQ LS]
LS characteristic
[Gain]: Input gain, the signal strength can be increased or decreased by 18 dB. Default setting: 0 dB. Press on the
controller to activate the fine adjustment. Double-clicking on the value accepts it as the default value.
[Freq]: Frequency adjustment in a range of 20 Hz…200 Hz (default setting: 100 Hz) is done using the hardware
controller on the device or the software controller on the display. Press on the controller to activate the fine adjust‐
ment. Double-clicking on the value accepts it as the default value.

DM 20

37
Downloaded from www.Manualslib.com manuals search engine