Page 54 - seo2eja5.jay

Operating

Reverb Open the menu by double-tapping on [Reverb1] or [Reverb2] in the FX menu.

1 Effects selection

2 [Type]: Use the right arrow button to open the selection list [Select] and select the desired effects type from: ‘Hall Bright’,
‘Hall Warm’, ‘Room Bright’, ‘Room Warm’, ‘Plate Bright’, ‘Plate Warm’.
3 [Dry – Wet]: Controller to adjust the effect portion of the unprocessed signal in a range of 0…100. Default setting: 0.
4 [EQ LS]
LS characteristic
[Gain]: Input gain, the signal strength can be increased or decreased by 18 dB. Default setting: 0 dB. Press on the controller
to activate the fine adjustment. Double-clicking on the value accepts it as the default value.
[Freq]: Frequency adjustment in a range of 20 Hz…200 Hz (default setting: 100 Hz) is done using the hardware controller
on the device or the software controller on the display. Press on the controller to activate the fine adjustment. Double-
clicking on the value accepts it as the default value.

DM 20

41
Downloaded from www.Manualslib.com manuals search engine