Page 305 - GENERAL CATALOGUE 2021_10MAYIS

Dust Pressed Ceramic Wall Tiles With High Water Absorption

TECHNICAL CHARACTERISTIC TS EN-14411 Annex G Group Bia VALUES EGE SERAMIK VALUE TEST STANDARD

7 cm:<,N < 15 cm± 0,75 mm 7cm:<,N < l5cm ± 0,75mm
Length and width ISO 10545-2
N;:>c 15 cm ± % 0,5 ve± 2,0mm N;:>c l5cm ±% 0,1 -±o/o 0,3
7cm:<,N<l5cm ±0,5mm
Thickness ± 10"/o ISO 10545-2
N ;:>c l5cm ± % 10 ve± 0,5mm
7 cm:<,N < 15 cm ±0,75 mm
Rectangularity ±o/o 0,10 -±% 0,3 ISO 10545-2
N ;:>c l5cm ± % 0,5 ve± 2mm
7 cm:<,N< 15 cm ±0,5 mm
Straightness of sides ±% 0,10 -±% 0,3 ISO 10545-2
N ;:>c 15 cm ± % 0,3 ve± 1,5 mm
7 cm:<,N< 15 cm+o,75 mm, -0,5 mm
Center Curvature ±% 0,10 -±% 0,3 ISO 10545-2
N ;:>c l5cm +0,50%/-0,30%ve+2mm, -l,5mm
7 cm:<,N< 15 cm+o,75 mm, -0,5 mm
Edge Curvature ±% 0,10 -±% 0,3 ISO 10545-2
N;:>cl5cm +0,50% /-0,30%ve+2mm, -l,5mm
7 cm:<,N < 15 cm ±0,75 mm
Warpage ±% 0,10 -±% 0,3 ISO 10545-2
N;:>cl5cm ± % 0,5 ve± 2mm
Surface Quality A minimum of 95 % of the tiles shall be free from visible defects that would impair the appearance of ISO 10545-2
a major area of tiles
Water Absorption Ev Av.> 10% Ev Av.> 10% ISO 10545-3

Thickness ;:>c 7,5 mm 12 N/mm2 Thickness ;:>c 7,5 mm 12 N/mm2
Modulus of Rupture ISO 10545-4
Thickness < 7,5 mm 15 N/mm2 Thickness < 7,5 mm 15 N/mm2
Thickness ;:>c 7,5 mm 600 N Thickness =!: 7,5 mm 600 N
Breaking Strength ISO 10545-4
Thickness < 7,5 mm 200 N Thickness < 7,5 mm 200 N
Impact resistance Declared value Test value for each product EN ISO 10545-5
Coefficient oflineer thermal expansion Declared value Si,87*10"" I c ISO 10545-8
0
Thermal Shock Resistance Test method available Resistance ISO 10545-9

Crazing Resistance Required Resistance ISO 10545-11
Resistant NO ALTERNATION WITH 100
Frost Resistance Required ISO 10545-12
CYCLES
Min Class LB
Resistance to acids and alkalis As indicated by the manufacturer ISO 10545-13
Min Class BB
Resistance to household chemicals and
As indicated by the manufacturer Min ClassB ISO 10545-13
swimming pool salts
Resistance to Staining Min. Class 3 Min. Class 3 ISO 10545-14

Pb-Cd Declared value Test value for each product ENISO10545-15
Scratch Hardness min 3Mohs min4Mohs EN IOI

303