Page 306 - GENERAL CATALOGUE 2021_10MAYIS

Dust Pressed Ceramic Floor Tiles With Low Water Absorption

TECHNICAL CHARACTERISTIC TS EN-1441) Annex G Group Bia VALUES EGE SERAMIK VALUE TEST STANDARD

7cm $ N < 15cm ± 0,75mm 7cm $ N < l5cm ± 0,75mm
Length and width ISO 10545-2
N,::15cm ±%0,5ve±2,0mm N,::15cm ±% 0,1 -±% 0,3
7cm $ N < l5cm ±0,5mm
Thickness ±10% ISO 10545-2
N,::15cm ± % 10 ve± 0,5mm
7cm$N < l5cm ±0,75mm
Rectangularity ±% 0,10 -±% 0,3 ISO 10545-2
N,::15cm ± % 0,5 ve± 2mm
7cm$N < l5cm ±0,5mm
Straightness of sides ±% 0,10 - ±% 0,3 ISO 10545-2
N,:: 15cm ± % 0,3ve± 1,5mm
7 cm:SN < 15 cm +o,75 mm, -0,5 mm
Center Curvature ±% 0,10 -±% 0,3 ISO 10545-2
N2: 15cm +0,50%/-0,30%ve+2mm, -l,5mm
7 cm :S N < 15 cm+0,75 mm, -0,5 mm
Edge Curvature ±% 0,10 -±% 0,3 ISO 10545-2
N2:15cm +0,50%/-0,30%ve+2mm, -l,5mm
7cm$N < l5cm ±0,75mm
Warpage ±% 0,10 - ±% 0,3 ISO 10545-2
N,::15cm ± % 0,5 ve± 2mm
Sur face Quality A minimum of 95 %of the tiles shall be free from visible defects that would impair the appearance of ISO 10545-2
a major area of tiles
Water Absorption Ev Av.> 10% Ev Av.> 10% ISO 10545-3

Thickness 2: 7,5 mm 12 N/mm2 Thickness 2: 7,5 mm 12 N/mm2
Modulus of Rupture ISO 10545-4
Thickness < 7,5 mm 15 N/mm2 Thickness < 7,5 mm 15 N/mm2
Thickness ~ 7,5 mm 600 N Thickness ~ 7,5 mm 600 N
Breaking Strength ISO 10545-4
Thickness < 7,5 mm 200 N Thickness < 7,5 mm 200 N
Impact resistance Declared value Test value for each product ENISO10545-5

Coefficient oflineer thermal expansion Declared value s5,81•10-<> 1 °c ISO 10545-8

Thermal Shock Resistance Test method available Resistance ISO 10545-9
Crazing Resistance Required Resistance ISO 10545-11

Resistant NO ALTERNATION WITH 100
Frost Resistance Required ISO 10545-12
CYCLES
Min Class LB
Resistance to acids and alkalis As indicated by the manufacturer ISO 10545-13
MinClassHB
Resistance to household chemicals and
As indicated by the manufacturer MinClassB ISO 10545-13
swimming pool salts
Resistance to Staining Min. Class 3 Min. Class 3 ISO 10545-14

Pb-Cd Declared value Test value for each product ENISO10545-15

Scratch Hardness min 3Mohs min4Mohs ENlOI

304