Page 212 - Modernfold Architectural Products

Acousti-Seal Pocket Doors Technical Data
®
10 22 26 (10650) Operable Partitions

ACOUSTI-SEAL 900 SERIES TECHNICAL DATA
®
astragal are not acceptable. f. Full height 1/4-inch (6.35 mm) natural cork
6. Panel Trim: No vertical trim required or tackboard with vinyl or fabric covering.
allowed on edges of panels; minimal groove g. Full height steel marker board.
appearance at panel joints. h. High pressure plastic laminate on MDF
7. Pocket Door hanging weight shall not exceed 9 board.
lbs./square foot i. Wood veneer on MDF board.
8. Panel face finish shall be (select as required): j. Uncovered for field finishing.
a. Reinforced vinyl with woven backing k. Primed for field finishing.
weighing not less than 21 ounces (595 g) 9. Pocket Door jambs shall be continuous channels
per lineal yard. anchored to a fixed wall. Welded hinge anchor
b. Reinforced heavy duty vinyl with woven plates shall support pocket door hinges and
backing weighing not less than 30 ounces permit a full 180-degree swing.
(850 g) per lineal yard. 10. Pocket Door framing and acoustical baffles as
c. Acoustical, non-woven needle punch required shall be by others.
carpet, with fused fibers to prevent
unraveling or fray of material. PART 3 – EXECUTION
d. Wall covering and upholstery fabric with
surface treatment to resist stains. See Operable Partition Specification for details.
e. Customer’s own material (subject to
factory approval).

ACOUSTICALLY RATED NON-ACOUSTICALLY RATED

HEADER AND
SWEEP CONTACT SOUND BAFFLE,
BLOCKING FRAMING & SWEEP
BY OTHERS CONTACT BLOCKING
BOTTOM OF BOTTOM OF BY OTHERS
SOFFIT/TRACK
SOFFIT/TRACK (13 mm)
FABRICATION HEIGHT FLOOR TO HEADER = FLOOR TO SOFFIT OF TRACK (83 mm) (40 mm) FABRICATION HEIGHT FLOOR TO HEADER = FLOOR TO SOFFIT OF TRACK (83 mm)
0.50"
1.56"

3.25"
3.25"

1.56"
(40 mm)
0.50"
(13 mm)
FINISHED FINISHED
FLOOR FLOOR

JAMB & CLOSURE
Note:
1. All pocket doors require
3" (76 mm) 1" (25 mm) jamb support (by others)
NOMINAL CLEARANCE
2. All pocket doors are
designed for 180 degree
door swing. Other
swings will affect pocket
clearances.
3. Field applied trim will affect
door swing.
2 Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com.