Page 255 - Modernfold Architectural Products

ACOUSTI-CLEAR AUTOMATIC Technical Data
®
10 22 26 Operable Partitions

ACOUSTI-CLEAR AUTOMATIC SERIES TECHNICAL DATA
®

sections, details, attachments to other automatic top and bottom seals.
construction, and accessories. Indicate B. Final Closure (select one):
dimensions, weights, conditions at openings, 1. Horizontally expanding panel edge with
and at storage areas, and required installation, removable crank.
storage, and operating clearances. Indicate 2. Pivot panel
location and installation requirements for a. Hardware – Satin Stainless Steel Finish
hardware and track, including floor tolerances (select one):
required and direction of travel. Indicate blocking 1. Non-locking Lever (Handle mounted
to be provided by others. in vertical rail not acceptable)
C. Setting Drawings: Show imbedded items and 2. Locking Lever (Handle mounted in
cutouts required in other work, including support vertical rail not acceptable)
beam punching template. 3. Non-locking Rail Handle
D. Samples: Color samples demonstrating full range 4. Locking Rail Handle
of finishes available by architect. Verification
samples will be available in same thickness and 2.3 PANEL CONSTRUCTION
material indicated for the work. A. Glass Panels
E. Reports: Provide a complete and unedited written 1. Type: Acousti-Clear Automatic Seal –
®
sound test report indicating glass thickness and Glass Panel.
spacing in test specimen matches product as 2. Nominal 4-inch (100 mm) thick panels in
submitted. manufacturer’s standard 48-inch (1220 mm)
widths. All panel horizontal and vertical
1.5 DELIVERY, STORAGE, AND HANDLING framing members shall be fabricated from
A. Clearly mark packages and panels with aluminum extrusions and mechanically
numbering systems used on Shop Drawings. Do fastened. Frame shall be designed to minimize
not use permanent markings on panels. exposure on face of panels.
B. Protect panels during delivery, storage, and 3. Panel Faces:
handling to comply with manufacturer’s direction a. 5/16-inch (8 mm) clear glass on one face,
and as required to prevent damage. mechanically fastened and sealed in
frame.
1.6 WARRANTY b. 3/8-inch (9.5 mm) clear glass on one
A. Provide written warranty by manufacturer of face, mechanically fastened and sealed
operable partitions agreeing to repair or replace in frame.
any components with manufacturing defects. c. Glass Type: Tempered, complying with
B. Warranty period: Two (2) years. ASTM C1036, ASTM C1048, CPSC 16 CFR
1201 Categories 1 & 2, and ANSI Z97.1.
PART 2 – PRODUCTS 4. Glass Finish (select one):
a. Clear tempered
2.1 MANUFACTURERS, PRODUCTS, AND OPERATION b. Low-iron tempered
A. Manufacturers: Subject to compliance with c. Frosted tempered
requirements, provide product by the following: d. Clear tempered - high STC
1. Modernfold, Inc. e. Low-iron tempered - high STC
B. Products: Subject to compliance with f. Frosted tempered - high STC
requirements, provide the following product: 5. Panel Trim: Pre-finished aluminum to protect
1. Acousti-Clear Automatic Seal – Single Panel edge of glass in one of the following finishes
®
- Manually operated and manually activated (select one):
individual panel operable partition. a. Clear Anodized
b. Satin Stainless Anodized
2.2 OPERATION c. White Powder Coat (RAL 9016)
A. Acousti-Clear Automatic Seal – Single Panel: d. Black Powder Coat (RAL 9004)
®
Series of individual flat panels, manually operated e. RAL “Classic” (Solid collection) Powder
Coat available (Sherwin Williams’
and manually activated, top supported with

2 Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com.