Page 257 - Modernfold Architectural Products

ACOUSTI-CLEAR AUTOMATIC Technical Data
®
10 22 26 Operable Partitions

ACOUSTI-CLEAR AUTOMATIC SERIES TECHNICAL DATA
®

1. Suspension Tracks: Minimum 11 gauge, PART 3 – EXECUTION
0.12-inch (3 mm) roll-formed steel track suitable
for either direct mounting to a wood header or 3.1 INSTALLATION
supported by adjustable steel hanger brackets A. General: Comply with ASTM E557, operable
supporting the load-bearing surface of the track, partition manufacturer’s written installation
connected to structural support by pairs of instructions, Drawings and approved Shop
3/8-inch (9.5 mm) diameter threaded steel rods. Drawings.
a. Exposed track soffit: Steel, integral to
track, and pre-painted off-white. B. Install operable partitions and accessories after
2. Carriers: Two all-steel trolleys with steel ball- other finishing operations, including painting have
bearing wheels and vinyl tires (except Pivot been completed.
Panel). Automatic indexing of panels into C. Match operable partitions by installing panels
stack area is provided by pre-programmed from marked packages in numbered sequence
switches and trolleys without electrical, indicated on Shop Drawings.
pneumatic, or mechanical activation. D. Broken, cracked, chipped, deformed or
3. Warranty period: Five (5) years. unmatched panels are not acceptable.

2.6 OPTIONS 3.2 ADJUSTING
A. Pass Doors (Glass Panel): A. Adjust operable partitions to operate smoothly,
1. Single Pass Doors: easily, and quietly, free from binding, warp,
a. Matching pass door same thickness excessive deflection, distortion, nonalignment,
and appearance as the panels. ADA- misplacement, disruption, or malfunction,
compliant pass door equipped with non- throughout entire operational range. Lubricate
locking lever latch. No threshold will be hardware and other moving parts.
permitted. Pass doors hinged or attached
to adjacent panels are not permitted. 3.3 EXAMINATION
2. Hardware (choose as required): A. Examine flooring, structural support, and opening,
a. Locking lever latch. with Installer present, for compliance with
b. Self-Illuminated exit signs. requirements for installation tolerances and other
c. Panic hardware. conditions affecting performance of operable
d. Door closer. partitions. Proceed with installation only after
B. Available Accessories/Options: unsatisfactory conditions have been corrected.
1. Horizontal mullions
a. Prefinished aluminum to match trim finish. 3.4 DEMONSTRATION
b. Same appearance and thickness as A. Demonstrate proper operation and maintenance
panel frame/trim. procedures to Owner’s representative.
c. Plastic mullions are not acceptable. B. Provide Operation and Maintenance Manual to
d. Mullions attached directly to the glass or Owner’s representative.
panel face are not acceptable.
2. Pocket Doors: Acousti-Seal Pocket Doors by
®
Modernfold, Inc.
3. Intersecting partition interface (select one):
a. “L” Post
b. “T” Post
c. “X” Post

4 Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com.