Page 273 - Modernfold Architectural Products

ACOUSTI-CLEAR AUTOMATIC Technical Data
®
10 22 26 Operable Partitions

ACOUSTI-CLEAR AUTOMATIC SERIES TECHNICAL DATA
®
partition manufacturer’s written installation throughout entire operational range. Lubricate
instructions, Drawings and approved Shop hardware and other moving parts.
Drawings.
B. Install operable partitions and accessories after 3.3 EXAMINATION
other finishing operations, including painting have A. Examine flooring, structural support, and opening,
been completed. with Installer present, for compliance with
C. Match operable partitions by installing panels requirements for installation tolerances and other
from marked packages in numbered sequence conditions affecting performance of operable
indicated on Shop Drawings. partitions. Proceed with installation only after
D. Broken, cracked, chipped, deformed or unsatisfactory conditions have been corrected.
unmatched panels are not acceptable.
3.4 DEMONSTRATION
3.2 ADJUSTING A. Demonstrate proper operation and maintenance
A. Adjust operable partitions to operate smoothly, procedures to Owner’s representative.
easily, and quietly, free from binding, warp, B. Provide Operation and Maintenance Manual to
excessive deflection, distortion, nonalignment, Owner’s representative.
misplacement, disruption, or malfunction,
SUSPENSION DETAILS

G-330 Aluminum Suspension G-330 Aluminum Suspension
Direct Mounted Direct Mounted with Ceiling Grid

Model Detail from Website Model Detail from Website
MA-01 MA-02

4 Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com.