Page 334 - Modernfold Architectural Products

Modernfold Compactline Technical Data
®
10 22 26 Operable Partitions

MOVABLE GLASS WALL TECHNICAL DATA

B. Protect panel and glazing materials during partitions with manufacturer’s standard panel
delivery, storage, and handling to comply with sizes to form an assembled system of dimensions
manufacturer’s direction and as required to indicated on Drawings, and verified by field
prevent damage to the glass and hardware. measurements.
1. Maximum panel width: 48-inches (1219mm)
1.6 WARRANTY 2. Standard rail thickness: 1-5/8-inches (41mm)
A. Manufacturer’s Special Project Warranty C. Top and Bottom Rails: Continuous two-piece
on Glass Panels: Provide written warranty assemblies with removable end caps. Rails fasten
signed by the manufacturer of glass operable together from alternate sides of partition allowing
partitions agreeing to replace those panels with for field adjustment to job site conditions. Covers
manufacturing defects. are furnished to facilitate installation.
1. Manufacturing defects are defined as any D. Bottom Rail Locking System: Engage adjacent
defect materially obstructing vision through panels by use of interlocking floor bolts to stabilize
the glass, and mechanical failure of hardware panels from movement in all directions.
which prevents the proper operation of the 1. Equip a minimum of one end panel with a
panels after appropriate installation. brass, mortised lock allowing for cylinder and/
2. Warranty period: One (1) year from date of or thumb turn operation. Round bolts engage
installation. dust-proof floor strikes for security.
2. Pivot panels to have mortised cylinder with key
PART 2 - PRODUCTS and thumb turn.
3. Intermediate panels to have interconnecting
2.1 MANUFACTURERS, PRODUCTS, AND OPERATION floor bolts.
A. Manufacturers: Subject to compliance with 4. Lead panels to have mortised cylinder with
requirements, provide products by one of the thumb turn.
following: E. Fully Framed (Optional): Extruded aluminum
1. Modernfold, Inc. vertical stiles measuring 7/8 inch (22 mm) by
B. Products: Subject to compliance with the 51/64 inch (20mm) with minimum wall thickness
requirements, provide one of the following of 3/32 inch (2 mm). Vertical stile shall have
products: an integral channel to accept vinyl seals used
1. Modernfold Glass Wall Model COMPACTLINE to create panel joints and panel interfaces.
®
with 4-7/8-inch (124mm) contoured top and Stile shall be continuous and run the entire
bottom rails. length of the panel between both rails cover
the glass edge. Stile applied to glass using a
2.2 OPERATION two-part epoxy. Silicone applied stiles are not
A. Manually operated and top-supported series of acceptable.
individual glass panels. Panels use two-piece,
clamp-on top and bottom rail that fastens 2.4 MATERIALS
together from alternating sides. A. Aluminum: Alloy and temper recommended
1. Final closure (Select one): by aluminum producer and finisher for type of
a. Pivot panel. use, corrosion resistance, and finish indicated;
b. Standard intermediate panel ending ASTM B221 (ASTM B221M) for extrusions;
within storage pocket, or at face of manufacturer’s standard strengths and
storage pocket. thicknesses for type of use.
B. Glass Type: Tempered, 1/2-inch (13 mm)
2.3 CONSTRUCTION complying with safety standards specified in ANSI
A. Provide top reinforcement as required to Z97.1 CPSC16, CFR1201, ASTM C1036 and ASTM
support panel from suspension components C1048.
and provide reinforcement for hardware C. Glass Finish (choose one):
attachment. Fabricate panels with concealed 1. Clear tempered
fasteners. Finished in-place partition shall be 2. Low-iron tempered
rigid, level, plumb, aligned with uniform joints 3. Frosted tempered
and appearance; free of bow, warp, twist, 4. Markerboard Low-iron tempered “Polar White”
deformation, and surface and finish irregularities. D. Panel Weight: 7.5 lbs./square foot
B. Dimensions: Fabricate operable glass panel

2 Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com.