Page 351 - Modernfold Architectural Products

Modernfold GWS SR-DRS/TR-DRS Technical Data
10 22 26 (10650) Operable Partitions

MOVABLE GLASS WALL TECHNICAL DATA

2. Dark Bronze anodized aluminum B. Automatic door closer – Pivot Panel
3. Black anodized aluminum 1. BTS80 floor closer
4. Satin stainless steel clad 2. RTS88 ceiling closer
5. Polished stainless steel clad C. Intersecting partition interface
6. Satin brass clad 1. 90° corner post
7. Polished brass clad
8. White Powder Coat (RAL 9016) PART 3 EXECUTION
9. Black Powder Coat (RAL 9004)
10. RAL “Classic” (Solids collection) Powder Coat 3.1 INSTALLATION
available (Sherwin Williams’ Powdura Super A. General: Comply with ASTM E557, operable
Durable TGIC Free Polyesters) provided in one glass partition manufacturer’s written installation
of the following (select one): instructions, Drawings, and approved Shop
a. Gloss finish (80°-85° gloss) Drawings.
b. Satin finish (30° gloss) B. Install operable glass partitions and accessories
after other finishing operations, including painting,
2.6 SUSPENSION SYSTEM (SELECT ONE) have been completed.
A. #17G Suspension System ”Smart Track” C. Match operable glass partitions by installing
1. Suspension Tracks: Minimum 11 gauge roll- panels from marked packages in numbered
formed steel track suitable for either direct sequence indicated on Shop Drawings.
mounting to a wood header or supported by D. Broken, cracked, chipped, deformed, or
adjustable steel hanger brackets supporting unmatched panels are not acceptable.
the load-bearing surface of the track,
connected to structural support by pairs of 3.2 CLEANING AND PROTECTION
3/8-inch (10 mm) diameter threaded steel A. Clean metal and glass surfaces upon completing
rods. installation of operable glass partitions to
a. Exposed track soffit: Steel, integral to remove dust, loose fibers, fingerprints, adhesives,
track and painted off-white. and other foreign materials according to
2. Carriers: Two all-steel trolleys with steel ball- manufacturer’s written instructions.
bearing wheels and vinyl tires. Automatic B. Provide final protection and maintain conditions
indexing of panels into stack area is provided in a manner acceptable to manufacturer and
by pre-programmed switches and trolleys Installer that insure operable glass partitions
without electrical, pneumatic, or mechanical are without damage or deterioration at time of
activation. Substantial Completion.

-OR- 3.3 ADJUSTING
A. Adjust operable glass partition to operate
B. G-330 Suspension System smoothly, easily, and quietly, free from
1. Suspension Tracks: Extruded aluminum with binding, warp, excessive deflection, distortion,
a minimum wall thickness of 0.235 inches nonalignment, misplacement, disruption, or
(6 mm). Incorporate cast aluminum or mitered malfunction, throughout entire operational range.
intersections, switches, and curves in stacking Lubricate hardware and other moving parts.
area. Provide alignment pins for track,
intersections, switches and curves insuring both 3.4 EXAMINATION
fit and roller surface integrity. A. Examine flooring, structural support, and opening,
a. Exposed track soffit: Factory-finished with Installer present, for compliance with
aluminum with white powder coat. requirements for installation tolerances and other
2. Carriers: Two stainless steel trolleys with vinyl conditions affecting performance of operable
roller surfaces. Trolley design incorporates eight glass partitions. Proceed with installation only after
(8) wheels of varying dimensions. Automatic unsatisfactory conditions have been corrected.
indexing of panels into stack area is provided 1. Insure finished floor under operable glass
by pre-programmed switches and trolleys partition is level ± 0.13-inch (3 mm) in ten (10)
without electrical, pneumatic, or mechanical feet (3048 mm) non-cumulative.
activation.
3.5 DEMONSTRATION
2.7 OPTIONS A. Demonstrate proper operation and maintenance
A. Door pulls back-to-back procedures to Owner’s representative.
1. 12” tubular pull B. Provide Operation and Maintenance Manual to
2. Manet 1240mm “Ladder Pull” Owner’s representatives.
3. TG-138 49” locking “Ladder Pull”
Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com. 3