Page 382 - Modernfold Architectural Products

Modernfold GWS PureView Technical Data
®
10 22 26 Operable Partitions

MOVABLE GLASS WALL TECHNICAL DATA

delivery, storage, and handling to comply with sizes to form an assembled system of dimensions
manufacturer’s direction and as required to indicated on Drawings, and verified by field
prevent damage to the glass and hardware. measurements.
1. Maximum panel width: 48-inches (1219 mm)
1.6 WARRANTY 2. Standard rail thickness: 1-9/16-inches (40 mm)
A. Manufacturer’s Special Project Warranty C. Top and Bottom Rails: Continuous two-piece
on Glass Panels: Provide written warranty assemblies with removable end caps. Rails fasten
signed by the manufacturer of glass operable together from alternate sides of partition allowing
partitions agreeing to replace those panels with for field adjustment to job site conditions. Snap-
manufacturing defects. on covers are furnished to facilitate installation.
1. Manufacturing defects are defined as any D. Horizontal Top and Bottom Seals: Continuous
defect materially obstructing vision through contact brush type seals without the need for
the glass, and mechanical failure of hardware mechanically operated parts.
which prevents the proper operation of the E. Bottom Rail Locking System: Engage adjacent
panels after appropriate installation. panels by use of interlocking floor bolts to stabilize
2. Warranty period: One (1) year from date of panels from movement in all directions.
installation. 1. Equip a minimum of one end panel with a
brass, mortised lock allowing for cylinder and/
PART 2 - PRODUCTS or thumb turn operation. Round bolts engage
eccentric bushing floor strikes for security.
2.1 MANUFACTURERS, PRODUCTS, AND OPERATION 2. Pivot panels to have mortised cylinder with key
A. Manufacturers: Subject to compliance with and thumb turn.
requirements, provide products by one of the 3. Intermediate panels to have interconnecting
following: floor bolts.
1. Modernfold, Inc. 4. Lead panels to have mortised cylinder with
B. Products: Subject to compliance with the thumb turn.
requirements, provide one of the following
products: 2.4 MATERIALS
1. Modernfold Glass Wall Model PureView with A. Aluminum: Alloy and temper recommended by
4-1/8-inch (105mm) square top and bottom aluminum producer and finisher for type of use,
rails. corrosion resistance, and finish indicated; ASTM
B221 (ASTM B221M) for extrusions; manufacturer’s
2.2 OPERATION standard strengths and thicknesses for type of
A. Manually operated and top-supported series of use.
individual glass panels. Panels use two-piece, B. Glass Type: Tempered, 1/2-inch (13 mm)
clamp-on top and bottom rail that fastens complying with safety standards specified in ANSI
together from alternating sides. Z97.1 CPSC16, CFR1201, ASTM C1036 and ASTM
1. Final closure (Select one): C1048.
a. Pivot panel. C. Glass Finish (choose one):
b. Standard intermediate panel ending 1. Clear tempered
within storage pocket, or at face of 2. Low-iron tempered
storage pocket. 3. Frosted tempered
4. Markerboard Low-iron tempered “Polar White”
2.3 CONSTRUCTION D. Panel weight: 7.5 lbs./square foot
A. Provide top reinforcement as required to
support panel from suspension components 2.5 PANEL FINISHES
and provide reinforcement for hardware A. Provide top and bottom rails with one of the
attachment. Fabricate panels with concealed following finishes:
fasteners. Finished in-place partition shall be 1. Clear anodized aluminum
rigid, level, plumb, aligned with uniform joints 2. Dark Bronze anodized aluminum
and appearance; free of bow, warp, twist, 3. Black anodized aluminum
deformation, and surface and finish irregularities. 4. Satin stainless anodized aluminum
B. Dimensions: Fabricate operable glass panel 5. White Powder Coat (RAL 9016)
partitions with manufacturer’s standard panel 6. Black Powder Coat (RAL 9004)

2 Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com.