Page 96 - Modernfold Architectural Products

Acousti-Seal Encore Technical Data
®
®
10 22 26 Operable Partitions

ACOUSTI-SEAL ENCORE SERIES TECHNICAL DATA
®
®
SUSPENSION SYSTEM OPTIONS

#14 Track System Direct Mount #17 Track System Direct Mount
(Smart Track Shown) (Right Angle Shown)

7 1/2" STRUCTURAL SUPPORT NOT BY MODERNFOLD
BRACKET OR DISTRIBUTOR (SHOWN FOR ILLUSTRATION
PURPOSE ONLY). DEFLECTION MUST MEET
5" ASTM E557 CONSTRUCTION STANDARD (SEE
GAGE ARCHITECT/GC NOTES).
RECOMMENDED SOUND BAFFLE TO BE (2) LAYERS
OF 5/8" GYPSUM BOARD EA. SIDE TO EXTEND AND
SEAL TO DECK ABOVE. FILL CAVITY WITH SOUND
BATT INSULATION. NOT BY MODERNFOLD OR
DISTRIBUTOR.
MODERNFOLD TRACK SYSTEM NOT TO BE USED
AS FRAMING AND/OR SUPPORT FOR SOUND
BAFFLE PLENUM CONSTRUCTION AND/OR
FINISHED CEILING CONSTRUCTION
CONTINUOUS AND LEVEL DOUBLE 2 X 10 MIN.
HEADER, NOT BY MODERNFOLD OR DISTRIBUTOR
ANY PENETRATION THROUGH HEADER SOUND (SHOWN FOR ILLUSTRATION PURPOSE ONLY,
BAFFLE MUST IN ACCORDANCE W/ ASTM E557 SEE ARCHITECT/GC NOTES).
AND APPROVED BY PROJECT ACOUSTICIAN.
11" MINIMUM .50" DIA. A36 STEEL HANGER RODS AND RECOMMENDED SOUND BAFFLE TO BE (2) LAYERS
OF 5/8" GYPSUM BOARD EA. SIDE TO EXTEND AND
SEAL TO DECK ABOVE. FILL CAVITY WITH SOUND
LOCKING FLANGE NUTS BY MODERNFOLD
DISTRIBUTOR.
CONTINUOUS STEEL TRACK 2 1/2" MIN BATT INSULATION. NOT BY MODERNFOLD OR
HANGER BRACKET BY MODERNFOLD ANY PENETRATION THROUGH HEADER SOUND
BAFFLE MUST IN ACCORDANCE W/ ASTM E557
STEEL BALLBEARING TROLLEY 2 1/8" AND APPROVED BY PROJECT ACOUSTICIAN.
ACOUSTICAL CAULKING, NOT BY MODERNFOLD
1 3/8" 1/8" OR DISTRIBUTOR
#14 X 2 1/2" ROUND HEAD TYPE A SCREW @ 6" O.C.
1 3/8" 3/4" ACOUSTICAL CAULK, FULL WIDTH, BOTH #17 STEEL TRACK PRE-PAINTED WHITE
SIDES, NOT BY MODERNFOLD OR
DISTRIBUTOR
POLYMER DISK
OFF WHITE BAKED ENAMEL SOFFIT TRIM TM
PAN BY MODERNFOLD SureSet AUTOMATIC TOP SEAL.
+ -
OPERATING RANGE: 1 3/8" .19"
TM
SureSet AUTOMATIC TOP SEAL.
+ -
OPERATING RANGE: 1 3/8" .19"
Model Detail from Model Detail from
10 1/4"
SOFFIT TRIM PAN Website Website
AE-001 AE-018
#17 Track System Bracket Mount RT100 Multi-Directional
(Right Angle Shown) Suspension System - 5.50”
7 1/2"
BRACKET
STRUCTURAL SUPPORT NOT BY MODERNFOLD OR
REFER TO MODERNFOLD ASCE 7 5 3/4" 5 1/2" DISTRIBUTOR (SHOWN FOR ILLUSTRATION PURPOSE ONLY).
DEFLECTION MUST MEET ASTM E557 CONSTRUCTION
DESIGN GUIDE FOR SEISMIC BRACING BRACKET STANDARD (SEE ARCHITECT/GC NOTES).
REQUIREMENTS. CONTACT YOUR STRUCTURAL SUPPORT NOT BY MODERNFOLD OR GAGE
DISTRIBUTOR FOR ADDITIONAL INFO. DISTRIBUTOR (SHOWN FOR ILLUSTRATION PURPOSE ONLY). RECOMMENDED SOUND BAFFLE TO BE (2) LAYERS OF 5/8"
4 1/2" DEFLECTION MUST MEET ASTM E557 CONSTRUCTION GYPSUM BOARD EA. SIDE TO EXTEND AND SEAL TO DECK
ABOVE. FILL CAVITY WITH SOUND BATT INSULATION. NOT BY
STANDARD (SEE ARCHITECT/GC NOTES).
GAGE MODERNFOLD OR DISTRIBUTOR.
RECOMMENDED SOUND BAFFLE TO BE (2) LAYERS OF 5/8"
GYPSUM BOARD EA. SIDE TO EXTEND AND SEAL TO DECK MODERNFOLD TRACK SYSTEM NOT TO BE USED AS
ABOVE. FILL CAVITY WITH SOUND BATT INSULATION. NOT BY FRAMING AND/OR SUPPORT FOR SOUND BAFFLE PLENUM
MODERNFOLD OR DISTRIBUTOR. CONSTRUCTION AND/OR FINISHED CEILING CONSTRUCTION
MODERNFOLD TRACK SYSTEM NOT TO BE USED AS
FRAMING AND/OR SUPPORT FOR SOUND BAFFLE PLENUM ANY PENETRATION THROUGH HEADER SOUND
CONSTRUCTION AND/OR FINISHED CEILING CONSTRUCTION BAFFLE MUST IN ACCORDANCE W/ ASTM E557
AND APPROVED BY PROJECT ACOUSTICIAN.
4 13/16" MINIMUM ANY PENETRATION THROUGH HEADER SOUND 7" MINIMUM .38" DIA. A36 STEEL HANGER RODS AND LOCKING
BAFFLE MUST IN ACCORDANCE W/ ASTM E557
FLANGE NUTS BY MODERNFOLD
AND APPROVED BY PROJECT ACOUSTICIAN.
.38" DIA. A36 STEEL HANGER RODS HANGER BRACKET BY MODERNFOLD
.38" UNISTRUT NUT
AND LOCKING FLANGE NUTS BY MODERNFOLD
1 3/8" 1/8" HANGER BRACKET BY MODERNFOLD 1" DUAL ROTATING NYLON TROLLEY
#17 STEEL TRACK PRE-PAINTED WHITE 1 3/8"
POLYMER DISK SPACER LOCATED IN REMOVABLE TRACK ONLY
BAFFLE JOINTS MUST BE TAPED AND SPACKLED
NOT BY MODERNFOLD OR DISTRIBUTOR RT100 TRACK PREPAINTED OFF-WHITE
TM
SureSet AUTOMATIC TOP SEAL.
+ -
OPERATING RANGE: 1 3/8" .19"
TM
SureSet AUTOMATIC TOP SEAL.
OPERATING RANGE: 1 3/8" .19"
+ -
5"
TRACK
Model Detail from Model Detail from
Website Website
AE-019 AE-040
Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com. 7