Page 6 - 2018 Racecar Engineering Open Wheel Parts and Accessories Catalog

SPRINT CAR COMPONENTS

Polished Round Dry Sump Tanks Heating Pads
Aluminum 6" tanks feature a high- High temperature silicone
ly polished finish and a completely heating pads externally
removable top to enable thorough preheat oil in wet sump oil ALL76422
cleaning. Three internal baffles are pans, dry sump tanks and
fastened to the top for easy removal automatic transmission pans reducing overall warm up time and im-
and cleaning. All tanks have two proving lubrication during initial start up. 3" cord, 120-volt operation.
3/8"NPT female ports on the top Part No. Description
cover for vent lines or return lines ALL76420 2"x15", Self Adhesive Pad, 200 W
and a 3/8" female NPT bottom port ALL76422 5"x7", Self Adhesive Pad, 375 W
for easy draining. Tanks are offered
in two versions, an AN version with ALL76424 6"x12", Velcro Strapped Pad For 6" O.D. Tanks, 435W
a -16AN return fitting and a 3/4"NPT WARNING! Do not plug heater in without being installed on tank or metal-
female supply fitting or an NPT ver- lic surface to absorb heat. Element heats up quickly and damage will
result.
sion with two 3/4"NPT female ports
for return and one 3/4"NPT female ALL36095 ALL36101
supply port. Mounting brackets must be purchased separately.
Immersion Heaters
Part No. Description Immersion style heater preheats oil in
Tank With AN Fittings
ALL36101 16" Tall, 6 Qts.* wet sump oil pan or dry sump tanks to
ALL36102 18" Tall, 7 Qts.* reduce overall warm up time and improve
Tank With NPT Fittings lubrication during initial start up. 5/8" diam-
eter stainless steel sleeve inserts into pan or tank and secures with
ALL36095 16" Tall, 6 Qts.*
ALL36096 18" Tall, 7 Qts.* a welded on 1/2" NPT brass screw-in fitting. 120-volt operation.
Replacement Parts Part No. Description
ALL36124 Cap ALL36124 ALL99075 ALL76415 4-3/4" Long Heater Element w/3' Long Cord, 400 W
ALL99075 Top O-Ring ALL76416 7-1/2" Long Heater Element w/12" Long Cord, 250 W
* Capacity listed is fluid filled to approximately 4" from top of tank. WARNING! Do not plug heater in without being installed in tank and sub-
Note: 1" of tank height equals approximately 1/2 quart of fluid. mersed in liquid, element heats up quickly and damage will result.

Round Dry Sump Tank Mounting Kit
ALL36094
Mounting with front motor plate on left
side of engine, bracket angles outward Sprint Wash Plug Set
slightly for extra clearance, and its non-slip Aluminum plugs have O-rings for a water
material protects the tank. Mounting straps and tank protectors are tight seal and will keep dirt out of injectors
included.
while cleaning sprint car. Four-piece set
comes with a nylon storage pouch.
Sprint Car Dry Sump Tank Mounting Brackets ALL26072
Part No. Size Wash Plug Dia. Stack Dia.
Mounting brackets are designed to mount 6" diameter tanks to the
left front corner of standard small block Chevy style engines. Com- Kinsler
monly mounted with front motor mount brackets the upper bracket ALL26072 2-1/4" 2.328" 2.335"
utilizes the water pump mounting holes and the lower bracket fas- ALL26073 2-11/16" 2.762" 2.790"
tens to the early front engine mount mounting holes. ALL26074 2-3/4" 2.848" 2.875"
ALL26075 2-13/16" 2.921" 2.950"
ALL26076 2.90" 2.973" 3.00"
Engler
ALL36092 ALL36093 ALL26033 2-1/2" 2.632" 2.650"
ALL26035 2-13/16" 2.885" 2.905"
ALL26036 2.90" 2.973" 3.00"
ALL26038 3" 3.073" 3.10"
Part No. Description
Hilborn
ALL36092 Upper Tank Mount
ALL26032 2-7/16" 2.483" 2.50"
ALL36093 Lower Tank Mount
Compact Electric Fuel Pump
Fuel Pressure Gauge ALL40330 ALL40320
Fuel pressure indicator gauge allows pre- High flow, low pressure electric
adjustment of the high speed, secondary fuel pump has 5/16" inlet/outlet
and main valve opening pressures using and flows 18 GPH @ 4.0 PSI, 5.5 PSI
a compressed air source. Gauge can be maximum. Popular mini-sprint pump
mounted directly to the wall or tool box. 4-1/2" includes a rubber-padded mounting bracket
diameter dial has a 0-160 PSI range. and two heavy duty hose clamps. Rated 12 volt/5
amps.

5