Page 9 - 2018 Racecar Engineering Open Wheel Parts and Accessories Catalog

SPRINT CAR COMPONENTS

Nose Wing Wall Mount Brackets Top Wing Trees ALL55130
ALL55132
ALL12214 Wing trees have
an “X” design for
Brackets attach to the
lateral and horizontal
side of trailer wall to hold
a spare sprint car front strength. Available in
16" and 18" tall ver-
nose wing safely in place.
Powder coated aluminum sions, each tree is ad-
justable and will extend
brackets feature slotted
arms which are fully ad- up to 6" with adjustment
holes located at 1" incre-
justable to accommodate
a variety of nose wing shapes and sizes. Sold in pairs ments. 16" trees are ideal ALL55131
for X wedge cars to keep the ALL55133
with retention straps to keep wing secure.
back of the top wing lower
while providing optimal top
Wing Caps wing tilt at high speed tracks.
4130 chrome moly 3/4" x .060"
Prevent rock and debris from damaging the leading edge of many
popular sprint car wings with a protective cap. tube construction. Wing trees are 26"
wide at the top and have a min/max
bottom width of 25-3/4" to 26-1/2". Adjuster pins not included.
Part No. Height Finish
ALL55130 16" (Extends To 22") Black
ALL55131 16" (Extends To 22") Plated
Part No. Description
ALL23220 Top Wing Cap, 60" Long, High Impact Plastic ALL55132 18" (Extends To 24") Black
ALL23222 Front Wing Cap, 36" Long, High Impact Plastic ALL55133 18" (Extends To 24") Plated
ALL23221 Top Wing, 60" Long, Carbon Fiber Part No. Description
ALL23223 Front Wing, 36" Long, Carbon Fiber Related Parts
ALL17028 Titanium Adjuster Pins, (1-Pair)
Manual Wing Adjuster ALL48004 ALL55134 Top Wing Tree Slider, Black
ALL55135 Top Wing Tree Slider, Plated
Titanium Top Wing Pin Kit
Use a manual adjuster for sprint car top wings when rules do not ALL17028
permit hydraulic cylinders. Slider includes 3/8"-24 steel thread rod
ends and is adjustable from 20" to 32" center-to-center in 1" incre- Kit includes two 1/4" x 1" pins with locking
ments with locking pin. Weight is less than 1 lb. clips for adjusting wing tree heights.
Hydraulic Wing Cylinders Top Wing Titanium Posts
7/8"
ALL55128
Top posts are 12" long overall and have a
Strong hydraulic wing cylinders have an aluminum body which 5/16" diameter T-bar to fit a wide range of
houses a steel piston and pushrod assembly. Available in 10" and wings. Position of T-bar is set at 75 degrees
12" length. providing additional wing angle. Strong tita-
Part No. Description nium 1" tube construction. Posts weigh only
ALL48000 10" .50 Lb. each and are sold as a pair.
ALL48002 12"
Titanium Studs For Wing Cylinders
Single stud used to mount the wing cylinder
to the chassis or wing tree. Stud has 3/8"-24
threads for mounting most cylinders. Mounting ALL17036
nuts not included. Sold each. ALL17038
Part No. Description
ALL17036 5/16"-24 x 3/8"-24 x 1.640" Stud
ALL17038 3/8"-24 x 3/8"-24 x 1.600" Stud
Wing Line Kit ALL48006
Kit with strong, lightweight, ultra flex-
ible, heat resistant, braided stainless
steel lines simplifies plumbing of KSE
Gen2 steering gear and wing cylinder.
Complete kit includes two #4 slider lines (22"
long and 36" long), one pressure line and one
return line (both 18" long), four 45° aluminum valve fittings,
two 90° aluminum cylinder fittings and two O-rings. KYLE HIRST RCM DESIGN
8