Page 107 - 2016-2017 Racecar Engineering Late Model Muscle Car Parts and Accessories Catalog

Thundervolt 50 10.4mm Custom Fit
Ignition Wire Set TAY98003
8mm Spiro Pro Custom Fit Wires have 50OHMS per foot resistance,
Ignition Wire Set TAY74244 three layers of pure Zimplex silicone,
102,000 volt. dielectric strength and 600°
Spiro-wound with stainless steel wire these wires are covered with heat protection with out additional sleeving.
a conductive fluorocarbon material. OEM resistor core wires eliminate Tightly woven heat treated fiberglass braid
radio frequency interference. Two layers of silicone. Red color. Fits and pure silicone pro boot are bonded to
2010-14 6.2L V8 SS Camaro and 1998-02 Camaro 5.7L. wire. Black color. Fits 2010-14 6.2L V8 SS Camaro.

Rollstop Kit TCI861735
Perform consistent,
reliable burn-outs.
Rollstop kit may be
GM LS1 Flexplate TCI399753 installed into 2010-
up Camaro without
Rigid, high tensile steel flexplate, which fits
1998-02 168-tooth internally-balanced LS1 the need for brake
applications using 4L60E automatic transmis- system modifications.
sions, is significantly stronger than the OEM unit, and is resistant to Precision solenoid is
cracking and elongation. Flexplate, which meets SFI specifications, is manufactured from 6061-T6 billet aluminum, incorporating a waterproof
.035” thicker than the OEM unit and is sized for 3/8” mounting bolts. design and a valve capable of withstanding 3,000 PSI. Sold complete
with solenoid, microswitch, in-line fuse connector and necessary hard-
ware for a custom installation.

Rear Trailing Arms/Toe Rod Kit
Rear suspension kit for 2010-14 Chevy
Camaro includes a pair of
heavy duty rear trailing arms
and a pair of toe rods to help
improve traction, eliminate
Driveshaft Tunnel Brace UMI2500 wheel hop and increase rear
end stability. USA-made components are fabricated from 1" x 2" rectan-
Heavy duty, direct bolt-in gular tubing, fitted with greasable polyurethane bushings and include a
brace, which fits 2010-14 corrosion-resistant black or red powder coated finish. Direct bolt-on kit
Chevy Camaro, replaces the uses the factory hardware.
OEM unit, reinforcing the
Red
Black
driveshaft tunnel and helping Application Part No. Part No.
to reduce chassis flex. Uses
the factory hardware. 2010-14 Chevy Camaro UMI251520-B UMI251520-R

Ring And Pinion Sets For GM 8.6” Rear
U.S. Gear sets listed below, designed for 2010-14 Camaro with 8.6” rear, are manufactured in the USA
using the highest quality materials and state-of-the-art manufacturing processes. High quality gear sets
are engineered to provide a clean installation and set-up, quiet performance and an extended life.
Sold complete with installation instructions.
Part No. Description
USG01-486308CM ...3.08 Ring And Pinion Set
USG01-486323CM ...3.23 Ring And Pinion Set
USG01-486373CM ...3.73 Ring And Pinion Set
USG01-486410CM ...4.10 Ring And Pinion Set

Supercharger System
A complete system with V-3 Si-Trim self-lubricating su-
percharger can add up to 47% more horsepower at 6.6-7.5
PSI boost and at the stock redline. Fits 2010-14 Camaro.
Part No. Description
VOR4GE218-018L ....Polished, Complete System

106
106
106
106
106 2016-17
106
106
106
106
106
106
106
106 MUSTANG PRODUCTSCAMARO PRODUCTS
2016-17