Page 23 - Villas De Espana_FR.June2023
P. 23

Rear Fence Design


                               Pressure treated board-on-board style
                               No lower than 42” in height and may not exceed 8’ in height (where fence in on
                                 retaining wall); but must be identical in height of the wing/side fences
                               Fences must be stepped to accommodate any change in grade
                               The bottom should be no higher than 6” above grade
                               Some fences are mounted on timber retaining wall
                               Rear fences may be removed (with DRB approval), but the wing/side fences
                                 must remain
                               Gate: to match the material, design, color and construction of the fence; or be
                                 single board wit square, straight, and flush with the top of the fence
   18   19   20   21   22   23   24   25   26   27   28