Page 14 - QR CIMAR TPP-10 HANDSAW

HHS/TEESIN/MAN/01/15 Compile by CJ

6. Inspection, Maintenance, and Cleaning

WARNING! Always make sure the engine is completely shut down prior to
performing any service, maintenance, or cleaning of the unit.

6.1) General Checklists

It is recommended to conduct an inspection on hydraulic hand saw before and after
operation.

Parts Checklists to follow
Structure Inspect the general condition of the hydraulic hand saw.
Frame Check for screws, misalignment or binding of moving parts, cracked, bent,
or broken parts, and any other condition that may affect the safe operation
of the hydraulic hand saw. If abnormal noise or vibration occurs, have the
problem corrected before further use. Do not use damaged equipment.

Maintenance Clean the concrete dust away after each use.

Storage Always store the hydraulic hand saw in a clean, dry, safe location out of

reach of children and other unauthorized people.

CAUTION! All maintenance, service, or repairs not mentioned in this manual
must only be performed by a qualified service technician.

Troubleshooting

Problem Possible Cause Possible Solution
Weak/no cutting process 1. Hydraulic leakage in Send for servicing
the system.
2. Unable to start up the
Hydraulic power pack.
3. Cutter wore out.
4. Hand lever faulty

For technical questions, please call +65 - 66431213 13
For Products Enquiry, please call +65 - 67581211