Page 12 - QR CIMAR TPP-10 HANDSAW

HHS/TEESIN/MAN/01/15 Compile by CJ

5.2) Dry & Wet Cutting Safety Guidelines

1. Do clean the flanges before mounting the blade and check both plates are the
same diameter.

2. Do ensure that the blade is correct for the material being cut.

3. Do ensure that the arrow on the blade corresponds with the direction of rotation of
the machine spindle.

4. Do ensure that the blade is in balance and running true. A blade which is out of
balance means increase wear and even possible destruction of the saw. Ensure
that the blade is concentric to within 0.15 mm.

5. Do ensure that the machine bearings and spindle are not worn - or blade life will
be reduced.

6. Do use the blade with a gentle reciprocating motion - especially when cutting
hard materials, and cut in the direction of the arrow.

7. Do only use machines which have an approved safety guard.

8. Do remove the diamond blade from the machine during transit to prevent
accidental damage.

9. Do inspect blades frequently to detect cracks or undercutting of the steel centre
and segments which could lead to segment loss.

10. Do always wear appropriate personal protective equipment including head, ear
and eye protection plus gloves and safety footwear.

11. Don't apply pressure and force your diamond blade through the cut. The weight of
the machine will suffice. Increased pressure means increase wear.

For technical questions, please call +65 - 66431213 11
For Products Enquiry, please call +65 - 67581211