Page 61 - ITALVIBRAS E-CATALOG

Category: II 2 D N
Level of protection: tD A21 IP66
Temperature class: see tab. pages 62-63
EC certificate: LCIE 05 ATEX 6163 X
Zones of use: 21, 22

Bearings Certifications
The lower and upper bearings have been
studied to support the relative load and Regulation CAN/CSA - C22.2 N. 100-95, Certificate of Conformity
therefore they have a particular geome- file n° LR100948 Class 4211 01 n° IECEx CES 09.0001X
try, especially designed and made for – Motors and generators. following standards IEC 61241-0, IEC 61241-1.
Italvibras.
Mechanical protection IP66 (EN 60529), Comply with the applicable
Motor shaft protection against impacts IK 08 European Union directives
In treated steel alloy (Isothermic harde- (EN 50102)
ning) resistant to stress.
II 2 D, tD A21 IP66 KOSHA Korea
Eccentric weights IEC/EN 61241-0, IEC/EN 61241-1 Certificate n° 11-AVG BO-0359
Allow greater adjustment of the centri- Certificate n. LCIE 05 ATEX 6163 X Ex td A21 IP66
fugal force, with phase shift of the lower
weight assembly with respect to the Certificate GOST-R n° POCC IT.AB72. Upon request available version MTF-C
upper group. This adjustment is eased by B03026, standards GOST R 51330.0-99, Class I, Div. 2, Groups ABCD
a graduated scale, which expresses the GOST R 51330.8-99, Standards CAN/CSA-C22.2
centrifugal force as a percentage of the GOST R IEC 61241-1-1-99
maximum centrifugal force.

Weight covers
In aluminium alloy, mounted only on the
lower side. The flange side does not have
weight cover. Size 40 is supplied without
weights covers on both sides.

Painting
Electrostatic surface treatment based on
polymerised epoxy polyester powder in
oven at 200°C. Tested in salt spray for 500
hours.

Stainless steel protection
On request, corrosion high grade protec-
tion (stainless steel micro suspensions in
a polyurethanic paint) is available.

61